Literature Cited
B. F. Trakhtenberg, The Stability of Dies and Means of Improving It [in Russian], Oblizdat, Kuibyshev (1964).
E. I. Bel'skii and N. S. Troimak, “The effect of alloying on the erosion stability of die steels,” Kuzn. Shtamp. Prvoidn., No. 8, 32–33 (1978).
L. A. Poznyak, Yu. M. Skrynchenko, and S. I. Tishaev, Die Steels [in Russian] Metallurgiya, Moscow (1980).
D. Rousseau, J. P. Pieger and L. Serfen, “Fatigue thermique des asiers a outils pour travail a chaud,” Revue de Metallurgie,72, No. 12, 875–889 (1975).
B. F. Trakhtenberg, M. A. Shubina, V. S. Teplov, and G. F. Kosolapov, “Structural changes in the contact zone of tools for hot stamping,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 2, 143–146 (1969).
V. I. Izotov, G. A. Kotel'nikov, G. P. Kulinichev, et al., “Structural changes in steel during cyclic and variable thermal exposure,” Metalloved. Term. Obrab. Met., No. 9, 2–4 (1982).
S. I. Tishaev and Yu. M. Politaev, “A new 4Kh3VMFS steel (DI71) for heavy-duty hot deformation pressing tools,” Kuzn. Shtamp. Prvoidn., No. 10, 29–30 (1983).
A. D. Abramov, Yu. A. Glukhov, G. A. Kotel'nikov, et al., “Instruments for the Thermal-Mechanical Fatigue Testing of Materials under Intensive Thermal Loading” [in Russian], in: Mekhanika, Kuibyshev (1975) (Trans. Kuibyshev Politekh. Inst., No. 8, 94–98).
S. S. Gorelik, The Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (1967).
P. I. Kudryavtsev, Nonpropagating Fatigue Cracks [in Russian], Mashinostroenie, Moscow (1982).
Additional information
Kuibyshev Polytechnic Institute. UkrNIISpetsstal', Zaporozhe. Translated from Problemy Prochnosti, No. 8, pp. 13–17, August, 1986.
Rights and permissions
About this article
Cite this article
Tishaev, S.I., Kotel'nikov, G.A., Miftakhov, R.G. et al. Structural aspects of crack propagation in heat-resistant steels under cyclic thermal-mechanical loading. Strength Mater 18, 1002–1008 (1986). https://doi.org/10.1007/BF01525343
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01525343