This is a preview of subscription content, log in via an institution to check access.
Literature Cited
I. A. Birger, B. F. Shorr, et al., The High Temperature Strength of Machine Parts [in Russian], Mashinostroenie, Moscow (1975).
Yu. N. Shevchenko, Thermal Plasticity under Varying Stresses [in Russian], Naukova Dumka, Kiev (1970).
N. N. Malinin and G. Khazhinskii, “The theory of creep with different mechanisms of deformation,” in: The Strength of Materials and Structures [in Russian], Naukova Dumka, Kiev (1975), pp. 190–196.
R. A. Aratyunyan and A. A. Vakulenko, “The repeated laoding of an elastoplastic medium”. Izv. Akad. Nauk SSSR. Mekh., No. 4, 57–61 (1965).
V. S. Zarubin and M. A. Kuz'min, “A calculation model of nonisothermal deformation of a constructional material”, Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 8, 31–35 (1967).
O. S. Sadakov, “An analysis of the stressed — deformed condition of design elements under cyclic nonisothermal loads on the basis of a structural model of the medium,” in: Materials of the All-Union Symposium on Low-Cycle Fatigue at Increased Temperatures [in Russian], Vol. 3, Chelyabinsk (1974), pp. 95–126.
R. M. Shneiderovich and A. P. Gusenkov, “Deformation-kinetic criteria of long-term cyclic strength,” in: Investigation of Low-Cycle Strength at High Temperatures [in Russian], Moscow (1975), pp. 39–61.
L. B. Getsov, “The effect of plastic deformation on the resistance to creep of high temperature strength alloys,” Izv. Akad. Nauk SSSR, Met., No. 6, 157–158 (1973).
L. B. Getsov, N. S. Lapukhina, K. M. Kononov, and Yu. N. Rebyakov, “The creep of nickel base high temperature strength alloys in cyclic elastoplastic loading,” in: Materials of the All-Union Symposium on Low-Cycle Fatigue at Increased Temperatures [in Russian], Vol. 4, Chelyabinsk (1974), pp. 56–64.
L. B. Getsov, K. M. Kononov, and Yu. N. Rebyakov, “The effect of plastic deformation on the resistance of a high temperature strength alloy to cyclic creep,” Energomashinostroenie, No. 9, 18–21 (1976).
Yu. N. Rabotnov, Creep Problems in Structural Members, North-Holland (1969).
G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials in the Complex Stressed Condition [in Russian], Naukova Dumka, Kiev (1976).
L. B. Getsov, Materials and Strength of Gas Turbine Parts [in Russian], Mashinostroenie, Leningrad (1973).
S. V. Serensen and R. M. Shneiderovich, “Criteria of failure in cyclic elastic — plastic deformation”, in: Strength with a Small Number of Load Cycles [in Russian], Moscow (1969), pp. 80–86.
M. G. Kabelevskii, “Cyclic nonsteady loading of a turbine disc,” Mekh. Tverd. Tela, No. 1, 169–174 (1972).
M. G. Kabelevskii and L. B. Getsov, “A method of calculating stresses and deformations in turbine discs under nonsteady conditions,” Mashinovedenie, No. 4, 82–89 (1977).
Additional information
Leningrad. Moscow. Translated from Problemy Prochnosti, No. 6, pp. 44–48, June, 1978.
Rights and permissions
About this article
Cite this article
Getsov, L.B., Kabelevskii, M.G. The question of theories of plasticity and creep in cyclic nonisothermal loading. Strength Mater 10, 660–666 (1978). https://doi.org/10.1007/BF01523898
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01523898