Literature Cited
R. B. Haywood, Mechanical Design Taking into Account Fatigue [Russian translation], Mashinostroenie, Moscow (1960).
P. Forrest, Metal Fatigue [Russian translation], Mashinostroenie, Moscow (1968).
S. V. Serensen, Strength of Metals and the Design of Machine Parts [in Russian], ONTI, Moscow (1937).
S. I. Ratner, Failure under Reccurent Loading [in Russian], Oboronogiz, Moscow (1959).
G. V. Uzhik, Methods of Fatigue Testing of Metals and Machine Parts [in Russian], Izd. AN SSSR, Moscow-Leningrad (1948).
R. France, Proc. ASTM part II (1931).
V. T. Troshchenko et al., “Analysis of the supporting power of samples in a nonuniform stressed state,” Probl. Prochnosti, No. 12 (1970).
V. T. Troshchenko and A. F. Getman, “Effect of small elastic-plastic deformations on the supporting power of samples with stress concentrators in conditions of recurrent alternate loading,” Probl. Prochnosti, No. 2 (1972).
V. T. Troshchenko and L. A. Khamaza, “Investigation of energy dissipation in metals at high temperatures,” Zavod. Lab., No. 8 (1970).
L. F. Shestopal, “A device for testing torsional fatigue and inelasticity of metals at room and high temperatures,” Probl. Prochnosti, No. 3 (1972).
V. T. Troshchenko, L. F. Shestopal, and V. A. Strizhalo, “Recording of recurrent strain diagrams of metals in a wide range of loading frequencies,” Probl. Prochnosti, No. 5 (1969).
V. T. Troshchenko and L. F. Shestopal, “Analysis of torsional fatigue failure and inelastic deformation of metals,” Probl. Prochnosti, No. 5 (1972).
Additional information
Institute of Strength of Materials, Academy of Sciences of the Ukrainian SSR. Translated from Problemy Prochnosti, No. 2, pp. 3–7, February, 1975.
Rights and permissions
About this article
Cite this article
Troshchenko, V.T., Shestopal, L.R. Criteria of torsional fatigue strength of metals. Strength Mater 7, 127–131 (1975). https://doi.org/10.1007/BF01522134
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01522134