Conclusion
-
1.
The use of maximum allowable indices for control on-site observations at a number of hydrostations show the possibility of substantially increasing the effectiveness of safety control of the operation of the structures.
-
2.
It is recommended to include the methods of determining the maximum allowable indices of the condition of hydraulic structures during design and methods of correcting them during service in the SNiPs.
Similar content being viewed by others
Literature cited
N. S. Rozanov, A. I. Tsarev, L. P. Mikhailov, and I. B. Sokolov, Design of Large Dams. Failures and Damages of Large Dams [in Russian], Énergoatomizdat, Moscow (1985).
L. P. Mikhailov and A. I. Tsarev, “Provision of safe operation of dams in the USA,” Gidrotekh. Stroit., No. 12 (1983).
V. Kh. Gol'tsman, “Selection of operating reliability criteria of structures and structural elements,” Gidrotekh. Stroit., No. 5, (1983).
A. I. Tsarev and F. G. Enikeev, “Maximum allowable indices of safe operation of hydraulic structure,” Gidrotekh. Stroit., No. 9 (1981).
Recommendations on Determining the Maximum Allowable Values of the Indices of the Condition and Operation of Hydraulic Structures. II-836-85 [in Russian], Gidroproekt (1985).
Technical Instructions on Observations of Settlements of Concrete Hydraulic Structures Being Constructed on Soft Ground [in Russian], Minénergo SSSR, NIS Gidroproekta (1980).
Recommendations on Predicting Extreme Displacements of the Crest of Concrete Gravity Dams During Their Service [in Russian], VNIIG, Énergiya, Moscow (1974).
Additional information
Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 5, pp. 22–25, May, 1987.
Rights and permissions
About this article
Cite this article
Tsarev, A.I., Blinov, I.F. & Enikeev, F.G. Increase of the effectiveness of safety control of hydraulic structures under pressure. Hydrotechnical Construction 21, 268–272 (1987). https://doi.org/10.1007/BF01463881
Issue Date:
DOI: https://doi.org/10.1007/BF01463881