Summary
The growth-strain method was used for general two-dimensional shape optimization. It was verified in previous papers that the growth-strain method is very effective for shape optimization of structures with only one free surface to be deformed. But it could not provide reasonable optimized shapes for structures with two or more free surfaces such as structures with holes inside. Problems occurred, as the growth-strain method was applied to structures with two or more free surfaces. Then, an improved method was suggested. Finally, an automatic shape optimization system was built by the improved growth-strain method with commercial software using the finite element method. The effectiveness and practicability of the developed shape optimization system was verified by some examples.
Similar content being viewed by others
References
Somayajula, G., Bernard, J.: Design optimization of structures subjected to static and dynamic constraints. Finite Elements in Analysis and Design5, 281–289 (1989).
Matsumoto, M., Abe, J., Yamazaki, K.: On development of programming system for optimum structural design and application to motorcycle frameworks. Trans. JSAE39, 120–126 (1988) (in Japanese).
Benett, J. A.: Structural optimization in the industrial design process. Int. J. Vehicle Design5, 115–128 (1984).
Hsu, Y. L.: A review of structural shape optimization. Comput. Industry26, 3–13 (1994).
Park, S., Youn, S.: A study on the topology optimization of structures. KSME J.21, 1241–1249 (1997).
Chu, D. N., Xie, Y. M., Hira, A. Steven G. P. Evolutionary structural optimization for problems with stiffness constraints. Finite Elements in Analysis and Design21, 239–251 (1996).
Azegami, H.: Shape optimization of solid structures using the growth-strain method. SAE 921063 (1992).
Azegami, H., Ogihara, T., Tagamik, A.: Analysis of uniform strength shape by the growth-strain method. JSME Int. J., Ser. 3,34, 355–361 (1991).
Han, S. Y., Bai, H. W.: Development of shape optimization system using stress control. J. KSMTE8, 52–58 (1999).
I-DEAS Master Series Manual: SDRC Inc. 1994.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Han, S.Y. Shape optimization for general two-dimensional structures. Acta Mechanica 145, 117–125 (2000). https://doi.org/10.1007/BF01453647
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01453647