Literature cited
Instructions on Preparing Rock Foundation of Concrete Hydraulic Structures with the Use of Smooth Blasting in Open Cuts VSN 40–70*/Minénergo SSR [in Russian], Énergiya, Leningrad (1973).
Technical Regulation of Conducting Blasting Operation in Power Construction [in Russian], Énergiya, Moscow (1972).
A. E. Azarkovich and M. I. Shuifer, “Effect of natural jointing of a rock mass on the radius of cracking during blasting,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 1 (1981).
F. A. Baum et al., Physics of an Explosion [in Russian], Nauka, Moscow (1975).
A. N. Dremin et al., “Investigation of the detonation of industrial explosives,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 6 (1971).
L. V. Dubnov, N. S. Barakhevich, and A. I. Romanov, Industrial Explosives [in Russian], Nedra, Moscow (1973).
A. N. Dremin et al., “Parameters of shock waves created by detonating ammonite No. 6-ZhV charges on the explosive-rock interface,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 2 (1971).
Methodological Instructions of Evaluating the Mechanical State of Rock Masses by Means of Elastic Waves [in Russian], Izd. Akad. Nauk SSSR, Moscow (1976).
Additional information
Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 5, pp. 17–21, May, 1982.
Rights and permissions
About this article
Cite this article
Shuifer, M.I., Azarkovich, A.E. Determination of the parameters of smooth blasting for the preliminary contouring method. Hydrotechnical Construction 16, 259–267 (1982). https://doi.org/10.1007/BF01427808
Issue Date:
DOI: https://doi.org/10.1007/BF01427808