Abstract
Carbides are necessary component part of the structure in high-speed steels. The wear resistance, heat resistance, and strength of these steels markedly depend on the amount of carbides, the ratio between different types of carbides, and their states. The aim of the present work is to study the phase composition of carbide precipitates obtained from atomized powder and the corresponding tungstenless powder high-speed steel of the type M5F5.
Similar content being viewed by others
References
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1983).
G. Hoyle, High-Speed Steels, Butterworths, London (1988).
H. Brandis, E. Haberling, and X. X. Weigand, “Metalllcundlische Betrachtung der Karbide in Schnellarbeitsstahlen,” Thyssen Edelstahlwerke. Technische Berichte,7, 115–122 (1981).
L. D. Moshkevich, S. I. Tishaev, N. E. Evlampieva, and A. N. Kurasov, “Features of eutectic carbide formation in high-speed steels,” Stal', No. 10, 62–67 (1983).
A. N. Popandopulo and G. É. Titenskaya, “Structure and phase composition of differently alloyed powder high-speed steels,” Metalloved. Term. Obrab. Met., No. 10, 8—11 (1983).
R. Stiller, L.-E. Svensson, P. R. Powell, et al., “High resolution microanalytical study of precipitation in a powder metallurgical high-speed steel,” Acta Metallurgica,32, No. 9, 1457–1467 (1984).
E. P. Kalinushkin, E. V. Arshava, and O. S. Yakushev, “Effect of cooling rate during crystallization of powder high-speed steels on the formation of the primary structure,” Metalloved. Term. Obrab. Met., No. 9, 13–17 (1987).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 23–26, June, 1994.
Rights and permissions
About this article
Cite this article
Mukhin, G.G., Pavlov, M.S. Carbides in atomized powder and powder tungstenless high-speed steel. Met Sci Heat Treat 36, 313–317 (1994). https://doi.org/10.1007/BF01401074
Issue Date:
DOI: https://doi.org/10.1007/BF01401074