Conclusions
We prepared clinker for high-alumina cement in a rotary kiln and determined the material balance in firing when preparing the raw mixtures with two methods: granulation in a plate granulator and briquetting on a roller press. It is shown that much less dust removal (4%) is ensured by firing the briquets obtained on the roller press. The aluminous cement obtained with this technology has a high graded strength.
Similar content being viewed by others
Literature cited
A. K. Karklit, V. A. Orlov, et al., Refractories for Vacuum Metallurgical Units [in Russian], Metallurgiya, Moscow (1982), p. 144.
I. V. Kravchenko, T. V. Kuznetsova, Yu. V. Kuznetsova, et al., Tsement, No. 5, 15–16 (1975).
A. N. Sokolov, O. V. Kvyatkovskii, S. A. Fleer, et al., Ogneupory, No. 10, 32–36 (1986).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 6, pp. 34–36, June, 1987.
Rights and permissions
About this article
Cite this article
Kvyatkovskii, O.V., Sokolov, A.N., Fleer, S.A. et al. Burning clinker for high-alumina cement in a rotary kiln. Refractories 28, 333–334 (1987). https://doi.org/10.1007/BF01399451
Issue Date:
DOI: https://doi.org/10.1007/BF01399451