Abstract
Internal nitriding is a process of surface saturation with nitrogen, in which there forms a diffusion layer, consisting of nitride particles that are uniformly distributed in a solid solution but without a surface zone of continuous nitrides, as in conventional nitriding. This is achieved by selection of the alloy chemical composition and the nitriding process regimes. The presence of this diffusion layer opens up broad possibilities for the hardening of various alloys, since a high level of brittleness of the layer is avoided. This is an advantage over conventional nitriding.
Similar content being viewed by others
References
Yu. M. Lakhtin, Ya. D. Kogan. D. P. Shashkov, and L. G. Petrova, “Improving the high-temperature strength of nickel-base alloys by nitriding,“ Metalloved. Term. Obrab. Met., No. 6, 19–24 (1989).
D. P. Shashkov and L. G. Petrova, “Technology and equipment for new progressive methods of chemicothermal treatment of tractor and agricultural machine parts,” in: Proc. All-Union Scientific-Technical Seminar [in Russian], Volgograd (1988), pp. 21–23.
Yu. M. Lakhtin, Ya. D. Kogan, D. P. Shashkov, and L. G. Petrova, “Materials and surface hardening of machine parts and tools to improve their reliability and service life,” Tr. MADI, 80–85 (1989).
S. S. Kiparisov and Yu. V. Levinskii, Internal Oxidation and Nitriding of Alloys [in Russian], Metallurgiya, Moscow (1979).
E. P. Abrahamson and N. J. Grant, in: Ductile Chromium, ASM, Cleveland, OH (1957), pp. 277–278.
Additional information
Moscow Highway Institute (MADI). Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 5–8, March, 1994.
Rights and permissions
About this article
Cite this article
Petrova, L.G. Principles of alloying of nickel alloys, hardenable by internal nitriding. Met Sci Heat Treat 36, 130–134 (1994). https://doi.org/10.1007/BF01398842
Issue Date:
DOI: https://doi.org/10.1007/BF01398842