Abstract
The ranges of application of traditional technologies of powder metallurgy, which include holding under a pressure of (5–7)·102 N/mm2, are limited by the necessity of using expensive press equipment and attachments. This paper investigates the structure and properties of heat-treated die steels produced by a new method of molding — from stabilized suspensions of metallic powders. Optimal suspension compositions and sintering conditions are proposed.
Similar content being viewed by others
References
P. J. Jomes, “Injection molding of metal powders,” Met. Powder Rep.,44, No. 5, 69–372 (1989).
B. K. Lograsso, A. Rose, and B. J. Carpenter, “Injection molding of carbonyl iron with polyethylene wax,” Int. J. Powder Met.,25, No. 4, 337–348 (1989).
V. G. Sorokin (ed.), Type Book of Steels and Alloys [in Russian], Mashinostroenie, Moscow (1989).
V. A. Vershinin, V. I. Kostikov, A. I. Zakharov et al., “Thermal expansion of materials formed from iron and nickel powders of invar composition,” Poroshk. Metall., No.11, 103–106 (1989).
V. N. Antsiferov and Yu. M. Kolbenev, Sintered Maraging Steels [in Russian], Perm' Polytech. Inst., Perm' (1975).
V. N. Antsiferov and T. G. Cherepanova, Structure of Sintered Steels [in Russian], Metallurgiya, Moscow (1981).
V. N. Antsiferov, V. B. Akimenko, and L. M. Grevnov, Powder Alloy Steels [in Russian], Metallurgiya, Moscow (1991).
V. N. Antsiferov, T. G. Cherepanova, and L. M. Grevnov, “Characteristic features of the heat treatment of wear-resistant sintered alloy steels,” in: Technology, Properties, and Use of Wear-Resistant Sintered Materials [in Russian], Theses of Papers Presented at the All-Union Scientific Conference, Moscow Inst. Steel and Alloys, Moscow (1974), pp. 22–23.
Additional information
Republican Technical Engineering Center of Powder Metallurgy. Scientific-Research Institute of Problems of Powder Technology and Coatings, Perm'. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 11–14, August, 1994.
Rights and permissions
About this article
Cite this article
Antsiferov, V.N., Khramtsov, V.D. Production of die steels by suspension molding. Met Sci Heat Treat 36, 407–411 (1994). https://doi.org/10.1007/BF01395223
Issue Date:
DOI: https://doi.org/10.1007/BF01395223