Abstract
Besides unalloyed titanium, titanium alloys are coming into increasing use in technology today. The application of titanium alloys, however, has been limited by the low resistance to various types of wear as well as a tendency to adhere and become scratched during work in subassemblies involving friction. It is thus of interest to develop a method of surface hardening of these materials to improve their wear resistance. The article reports the results of studies on the structure of diffusion layers in a and α + β titanium alloys after ion-beam nitriding.
Similar content being viewed by others
References
T. A. Panaioti and G. V. Solov'ev, “Structure, phase composition, and hardness of nitrided titanium,” Metalloved. Term. Obrab. Met., No. 9, 34 (1992).
D. A. Prokoshkin, T. A. Panaioti and G. V. Solov'ev, “Study of ion-beam nitriding of titanium,“ Izv. Vyssh. Uchebn. Zaved. Mashinostroenie, No. 5, 107 (1985).
U. Zwicker, Titan and Titanlegierungen, Springer Verlag, Berlin (1974), p. 248.
A. D. Nachinkov, “Nitriding of Titanium and its Alloys” in: Physical Metallurgy and Heat Treatment No. 3 [in Russian], LDNTP, Leningrad (1960).
Yu. M. Lakhtin and Ya. D. Kogan, Structure and Strength of Nitrided Alloys [in Russian], Metallurgiya, Moscow (1982).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 34–37, May, 1994.
Rights and permissions
About this article
Cite this article
Panaioti, T.A., Solov'ev, G.V. Distinctive features of diffusion layers formed by ion-beam nitriding of α and α + β titanium alloys at 500 to 1000°c. Met Sci Heat Treat 36, 273–278 (1994). https://doi.org/10.1007/BF01390454
Issue Date:
DOI: https://doi.org/10.1007/BF01390454