Conclusions
Plans of new designs of drives for pulsating conveyors and tilters designed for use in automatic lines for forming the charge of refractory-part green compacts on the furnace car, unloading the charge after firing, and forming the bundles for shipping are described. The calculations made of the dynamic characteristics of these mechanisms confirm the correctness of the technical solutions adopted. From an analysis of the dynamic characteristics of the proposed mechanisms it follows that they have significant reserves for increasing the operating speed, as the result of which it is possible to increase the capacity of both the individual mechanisms described in the article and the automatic line as a whole. The design simplicity of the proposed mechanisms provides reliable operation of them under high-speed conditions and under conditions of an abrasive medium.
Similar content being viewed by others
Literature cited
A. I. Zavrazhnyi and N. A. Shopin, Ogneupory, No. 8, 12–16 (1981).
A. A. Kozlovskii and B. A. Éiderman, Conveyor Pneumatic Drives and Auxiliary Mechanisms [in Russian], Mashinostroenie, Moscow (1971).
V. G. Vodyanitskii, I. G. Dondik, and L. I. Rozenman, Elements of Automation and Machine Parts [in Russian], Naukova Dumka, Kiev (1966).
N. S. Acherkan, S. A. Chernavskii, and V. S. Vladislavlev, Heat Treater's Handbook [in Russian], Vol. 1, Mashgiz, Moscow (1958).
A. I. Zavrazhnyi and I. I. Kozyryatskii, Inventor's Certificate 988691, Byull. Izobret., No. 2, 4 (1983).
N. P. Raevskii and M. I. Subbotin, Measurement of Linear Accelerations [in Russian], Izd. Akad. Nauk SSSR, Moscow (1961).
L. B. Ostrovskii, V. N. Popik, and I. M. Khaskin, Inventor's Certificate No. 610753, Byull. Izobret., No. 22, 3 (1978).
A. I. Zavrazhnyi and A. I. Bel'chenko, Inventor's Certificate No. 994378, Byull. Izobret., No. 5, 5 (1983).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 12, pp. 30–34, December, 1984.
Rights and permissions
About this article
Cite this article
Zavrazhnyi, A.I., Usachev, V.P. Transportation mechanisms for automatic lines in refractory production. Refractories 25, 702–707 (1984). https://doi.org/10.1007/BF01389945
Issue Date:
DOI: https://doi.org/10.1007/BF01389945