Abstract
This paper proposes a unified formulation of reliability-based limit state optimization problems for discrete structures. Two approaches are presented: neglecting and accounting for nonlinear geometric effects at the limit state. For discrete structures, the classical limit state problem may be defined as a linear program, whereas the limit state problem accounting for geometric effects is considered as a two-level linear program. A portal frame example is considered in detail. Results of deterministic- and reliability-based optimization are compared. In both cases the impact on structural safety due to neglecting geometric effects is discussed.
Similar content being viewed by others
References
Arora, J.S. 1989:Introduction to optimum design. New York: McGraw Hill
Bjerager, P. 1988: Probability integration by directional simulation.J. Eng. Mech. Div., ASCE 114, 1285–1302
Bondok, H.; Janas, M.; Siemaszko, A. 1993: A numerical program for post-yield and inadaption analysis of space skeletal structures.Proc. XI Conf. on Comp. Meth. in Mechanics (held in Kielce),I, 129–137
Cohn, M.Z.; Gosh, S.K.; Parimi, S.R. 1972: A unified approach to the theory of plastic structures.J. Eng. Mech. Div., ASCE 98, 1133–1158
Corotis, R.B.; Soltani, M. 1985: Structural system reliability, limit states and modal consequences.Proc. 4th Int. Conf. on Structural Safety and Reliability (held in Kobe),I, 107–116
Cyras, A.A. 1969:Linear programming and analysis of elastic-plastic structures (in Russian). Leningrad: Stroiizdat
Doliński, K. 1983: First-order second-moment approximation in reliability of structural systems: critical review and alternative approach.Struct. Safety 1, 211–231
Duszek, M.; Sawczuk, A. 1976: Stable and unstable states of rigid-plastic frames at the yield point load.J. Struct. Mech. 4, 33–47
Engelund, S.; Rackwitz, R. 1993: A benchmark study on importance of sampling techniques in structural reliability.Struct. Safety. 12, 255–276
Frangopol, D. 1985: Multicriteria reliability-based structural optimization.Struct. Safety 3, 23–28
Haftka, R.T.; Gurdal, Z.; Kamat, M.P. 1990:Elements of structural optimization. Dordrecht: Kluwer
Janas, M. 1968: Large plastic deformations of reinforced concrete slabs.Int. J. Solids Struct. 4, 61–74
Lodygowski, T. 1982: Geometrically nonlinear analysis of rigid plastic beams and plane frames (in Polish).IFTR Reports 9
Madsen, H.O.; Krenk, S.; Lind, N.C. 1986:Methods of structural safety. Prentice-Hall
Maier, G. 1970: A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes.Meccanica 5, 54–66
Nguyen, D.H. 1983: Aspects of analysis and optimization of structures under proportional variable loadings.Eng. Opt. 7, 35–57
Onat, E.T.; Haythornthwaite, R.M. 1956: The load-carrying capacity of circular plates at large deflection.J. Appl. Mech. 23
Parimi, S.R.; Cohn, M.Z. 1975: Optimal criteria in probabilistic structural design. In: Sawczuk, A.; Mróz, Z. (eds.)Optimization in structural design, pp. 278–293. Berlin, Heidelberg, New York: Springer
Santos, J.L.T.; Siemaszko, A.; Gollwitzer, S.; Rackwitz, R. 1995: Continuum sensitivity method for reliability-based structural design and optimization.Mech. Struct. Mach. (in print)
Siemaszko, A. 1988: Stability analysis of shakedown processes of plane skeletal structures (in Polish).IFTR Reports 12, 1–176
Siemaszko, A. 1995: Limit, post-yield, shakedown and inadaption analysis of inelastic discrete structures. In: Mróz, Z.; Weichert, D.; Dorosz, S. (eds.)Inelastic response of structures under variable loads. Dordrecht: Kluwer
Siemaszko, A.; König, J.A. 1990: Plastic optimization accounting for nonlinear geometrical effects.Proc. GAMM '90 (held in Hannover)
Siemaszko, A.; Mróz, Z. 1991a: Sensitivity of plastic optimal structures to imperfections and nonlinear geometrical effects.Struct. Optim. 3, 99–105
Siemaszko, A.; Mróz, Z. 1991b: Optimal plastic design of imperfect frame structures. In: Grierson, D.; Franchi, A.; Riva, P. (eds.)Progress in structural engineering. Dordrecht: Kluwer
Siemaszko, A.; Santos, J.L.T. 1993: Reliability-based structural optimization. In: Herskovits, J. (ed.)Proc. Struct. Opt. 98 (held in Rio de Janeiro), pp. 473–480. Rio de Janeiro: Coppe
Thoft-Christensen, P. 1990: On reliability-based structural optimization. In: Der Kiureghian, A.; Thoft-Christensen, P. (eds.)Proc. 3rd IFIP WG 7.5 Conf., pp. 387–402. Berlin, Heidelberg, New York: Springer
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Siemaszko, A., Doliński, K. Limit state reliability optimization accounting for geometric effects. Structural Optimization 11, 80–87 (1996). https://doi.org/10.1007/BF01376848
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01376848