Literature Cited
A. N. Guz', “Stability of orthotropic bodies,” Prikl. Mekh.,3, No. 5, 29–38 (1967).
A. N. Guz', Dupov. Akad. Navuk UkrRSR, Ser. A., No. 3, 236–238 (1969).
A. N. Guz', Stability of Three-Dimensional Deformable Solids [in Russian], Naukova Dumka Kiev (1971).
A. N. Guz', “Mechanism of fracture of composites in axial compression (brittle fracture) Prikl. Mekh.,18, No. 10, 3–16 (1982).
A. N. Guz', Mechanics of Brittle Fracture of Materials with Initial Stresses [in Russian] Naukova Dumka, Kiev (1983).
A. N. Guz', “Criteria of brittle fracture in the compression of materials with defects,” Dokl. Akad. Nauk SSSR,285, No. 4, 828–831 (1985).
A. N. Guz', “Three-dimensional theory of stability of deformable bodies. Surface instability,” Prikl. Mekh.,22, No. 1, 24–35 (1986).
A. N. Guz', Principles of the Three-Dimensional Theory of Stability of Deformable Bodies [in Russian], Vishcha Shkola, Kiev (1986).
L. Brautman and R. Krock (eds.), Composite Materials [Russian translation], Vols. 1–8, Mir, Moscow (1978–1979).
S. G. Lekhnitskii, Theory of Elasticity of Anisotropic Bodies [in Russian], Nauka, Moscow (1977).
N. N. Muskhelishvili, Certain Basic Problems of the Mathematical Theory of Elasticity, Nauka, Moscow (1966).
G. S. Katz and D. V. Milevsky (eds.), Fillers for Composite Materials: Handbook [Russian translation], Khimiya, Moscow (1981).
Strength and Fracture of Composite Materials, Zinatne, Riga (1983).
Fracture of Composite Materials, Zinatne, Riga (1979).
G. Libovitz, (ed.), Fracture [Russian translation], Vols. 1–7, Mir, Moscow (1979).
G. N. Savin, Stress Distribution Around Holes, Naukova Dumka, Kiev (1968).
L. I. Sedov, Continuum Mechanics, Vol. 2, Nauka, Moscow (1976).
T. Fudzin and M. Dzako, Mechanics of Fracture of Composite Materials [Russian translation], Mir, Moscow (1982).
G. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Nauka, Moscow (1974).
G. P. Cherepanov, Mechanics of Fracture Composite Materials [in Russian], Nauka, Moscow (1983).
M. A. Biot, Mechanics of Incremental Deformations, Wiley, New York (1965).
Fracture of Composite Materials, Martinus Nijhoff Publishers (1982).
A. A. Griffith, “The phenomenon of rupture and flow in solids,” Philos. Trans. R. Soc. London, Ser. A,211 No. 2, 163–198 (1920).
G. R. Irwin, “Analysis of stresses and strains near a crack traversing a plate,” J. Appl. Mech.,24, No. 3, 361–364 (1957).
G. R. Irwin, Fracture/Handbuch der Physik, Vol. 6, Springer, Berlin (1958), pp. 551–590.
Additional information
Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 22, No. 12, pp. 46–54, December, 1986.
Rights and permissions
About this article
Cite this article
Guz', A.N. Criterion of brittle fracture near stress raisers in composites in compression. Soviet Applied Mechanics 22, 1148–1154 (1986). https://doi.org/10.1007/BF01375812
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01375812