Abstract
Steel 20kh 13 is widely used in the production of blades of steam turbines and machine parts that require a high erosion resistance in operation with maintenance of a high impact strength. After hardening with the use of HFC heating or bulk hardening of blades, the latter exhibit warping or insufficiently high erosion resistance. Even hardening with the use of currents of superhigh frequencies does not eliminate completely the deformation of parts. Local heating by an electron beam decreases deformation considerably even under conditions of a fused surface layer in the steel and increases its erosion resistance markedly. For this reason, it is of interest to investigate the effect of electron-beam treatment on the mechanical and operational properties of turbine blades.
Similar content being viewed by others
References
S. Shiller and S. Pantser, “Thermal modification of the surface of metallic structures by electron beams,”Metally,29(3), 227 - 232 (1985).
A. A. Gol'denberg and V. I. Polikarpov, “Effect of electron-beam and laser treatment on the structure and properties of machine materials (a review),”Vestn. Mashinostr., No. 8, 55 – 58 (1984).
T. Ekobori,Scientific Foundations of the Strength and Fracture of Materials [in Russian], Naukova Dumka, Kiev (1978).
V. S. Litvinov, S. D. Karakishev, and V. V. Ovchinnikov,Nuclear Gamma Resonance Spectroscopy of Alloys [in Russian], Metallurgiya, Moscow (1982).
S. D. Karakishev, V. A. Korablev, V. A. Ivchenko, et al., “On the distribution of chromium and carbon in hardened steel 35Kh5,”Fiz. Met. Metalloved, No. 4, 163 – 170 (1990).
V. G. Gavrilyuk, V. M. Nadutov, O. P Oshkaderov, et al., “Phase and magnetic transformations in the iron-nickel-carbon alloy at low temperatures,”Fiz. Met. Metalloved, No. 7, 128 – 133 (1990).
R. G. Perel'man and V. V., Pryakhin,Erosion in Steam Turbine Components [in Russian], Energoizdat, Moscow (1986).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 25 – 27, February, 1996.
Rights and permissions
About this article
Cite this article
Detsik, V.N. Mechanical properties of steel 20Kh13 after electron-beam treatment. Met Sci Heat Treat 38, 75–77 (1996). https://doi.org/10.1007/BF01362161
Issue Date:
DOI: https://doi.org/10.1007/BF01362161