Summary
The vibrational behavior of geometrically imperfect single and multilayered composite double-curved shallow panels subjected to a system of tangential compressive/tensile edge loads in the pre- and postbuckling ranges is investigated. The effects of transverse shear deformations, lamination, the character of in-plane boundary conditions, and of transverse normal stress are incorporated and their influence is emphasized.
Numerical illustrations enabling one to compare the obtained results based on higher order and first order shell theories with their classical counterparts, based on the Love-Kirchhoff model are presented and conclusions related to their range of applicability are outlined.
Similar content being viewed by others
References
Bhimarradi, A.: Non-linear free vibration analysis of composite plates with initial imperfections and in-plane loadings. Int. J. Sol. Struct.25, 33–43 (1989).
Rosen, A., Singer, J.: Effect of axisymmetric imperfections on the vibrations of cylindrical shells under axial compression. AIAA J.12, 995–997 (1974).
Rosen, A., Singer, J.: Influence of asymmetric imperfections on the vibrations of axially compressed cylindrical shells. Israel J. Technol.14, 23–36 (1976).
Singer, J., Prucz, J.: Influence of initial geometrical imperfections on vibrations of axially compressed stiffened cylindrical shells. J. Sound Vibration80, 117–143 (1982).
Hui, D.: Influence of geometric imperfections and in-plane constraints on nonlinear vibrations of simply-supported cylindrical panels. J. Appl. Mech.51, 383–390 (1984).
Hui, D.: Effects of geometric imperfections on frequency-load interaction of biaxially compressed antisymmetric angle ply rectangular plates. J. Appl. Mech.52, 155–162 (1985).
Hui, D., Leissa, A. W.: Effects of geometric imperfections on vibrations of biaxially compressed rectangular flat plates. J. Appl. Mech.50, 750–756 (1983).
Elishakoff, I., Birman, V., Singer, J.: Small vibrations of an imperfect panel in the vicinity of a nonlinear static state. J. Sound Vibration114, 57–63 (1987).
Ilanko, S., Dickinson, S. M.: The vibration and post-buckling of geometrically imperfect, simply supported rectangular plates under uni-axial loading. Part I. Theoretical approach. J. Sound Vibration118, 313–336 (1987). Part II. Experimental investigation. J. Sound Vibration118, 337–351 (1987).
Liu, D. K., Arbocz, J.: Influence of initial geometric imperfections on undamped vibrations of thin circular cylindrical shells. Delft University of Technology, Report LR-457 (1986).
Du, I., Hui, D.: Frequency-load interaction of imperfect angle-ply cylindrical panels under compression and pressure. AIAA J.25, 484–491 (1987).
Kapania, R. K., Yang, T. Y.: Buckling, postbuckling and nonlinear vibrations of imperfect plates. AIAA J.25, 1338–1346 (1987).
Heinen, J. W.: Vibration of geometrically imperfect beam and shell structures. Int. J. Sol. Struct.27, 29–47 (1991).
Heinen, J. W., Pedersen, P. T.: Vibrations of imperfect ship plating. The Danish Center for Applied Mathematics and Mechanics, The Technical University of Denmark, DCAMM Report No. 422, 1991.
Elishakoff, I., Birman, V., Singer, J.: Effect of imperfections on the vibrations of loaded structures. J. Appl. Mech.51, 191–193 (1984).
Librescu, L., Khdeir, A. A., Reddy, J. N.: Further results concerning the dynamic response of shear deformable elastic orthotropic plates. Z. Angew. Math. Mech.70, 23–33 (1989).
Chandiramani, N. K., Librescu, L., Aboudi, J.: The theory of orthotropic viscoelastic shear deformable composite flat panels and their dynamic stability. Int. J. Sol. Struct.25, 465–482 (1989).
Librescu, L., Stein, M.: A geometrically nonlinear theory of transversely-isotropic laminated composite plates and its use in the postbuckling analysis. Thin Walled Structures, Special Issue of Aeronautical Structures11, 177–201 (1991).
Librescu, L., Chang, M. Y.: Post-buckling and imperfection sensitivity of shear deformable composite doubly-curved panels. Int. J. Sol. Struct. (in print).
Arbocz, J.: Past, present and future of shell stability. Z. Flugwissenschaften Weltraum-Forschung5, 335–348 (1981).
Citerley, R. L.: Imperfection sensitivity and post-buckling behavior of shells, pressure vessels and piping: design technology — a decade of progress. (Zamrik, S. Y., Dietrich, D., eds.). New York: The American Soc. of Mech. Eng. 1982.
Simitses, G.: Buckling and postbuckling of imperfect cylindrical shells — a review. Appl. Mech. Rev.39, 1517–1524 (1986).
Bushnell, D.: Computerized buckling analysis of shells. The Netherlands: Martinus Nijhoff 1985.
Garber, A. M.: Pyrolitic materials for thermal protection systems. Aerospace Engineering 126–137 (1963).
Terner, E.: On thermal stresses in certain transversely isotropic, pyrolitic materials. Proceedings of the Fourth U.S. National Congress of Applied Mechanics, pp. 1147–1152 (1962).
Green, A. E., Zerna, W.: Theoretical elasticity. Oxford: At the Clarendon Press 1968.
Gol'denveizer, A. L.: Theory of thin shells (in Russian). Moscow: Nauka 1976.
Naghdi, P. M.: Foundations of elastic shell theory. In: Progress of solid mechanics (Sneddon, I. N., Hill, R., eds.)4, 1–101 (1962).
Librescu, L.: Elasto-statics and kinetics of anisotropic and heterogeneous shell-type structures. Netherlands: Noordhoff 1975.
Reddy, J. N., Liu, C. T.: A higher-order theory for geometrically nonlinear analysis of composite laminates. NASA Cr. Rept. 4656 (1987).
Simitses, G., Anastasiadis, J. S.: Shear deformable theories for cylindrical laminates — the equilibrium and buckling. AAIA J. (in press).
Dennis, S. T., Palazotto, A. N.: Large displacement and rotational formulation for laminated shells including parabolic transverse shear. Int. J. Non-Linear Mech.25, 67–86 (1990).
Librescu, L.: Refined geometrically non-linear theories of anisotropic laminated shells. Quart. Appl. Mathematics45, 1–22 (1987).
Librescu, L., Reddy, J. N.: A few remarks concerning several refined theories of anisotropic laminated plates. Int. J. Eng. Sci.27, 515–527 (1989).
Reissner, E.: Reflections on the theory of elastic plates. Appl. Mech. Rev.28, 1453–1464 (1985).
Reissner, E.: On small finite deflections of shear deformable elastic plates. Comp. Meth. Appl. Mech. and Engng.59, 227–233 (1986).
Pelech, B. L.: Generalized theory of shells (in Russian). Lvov: High School 1978.
Seide, P.: A reexamination of Koiter's theory of initial postbuckling behavior and imperfection sensitivity of structures. In: Thin shell structures: theory, experiment, and design. (Fung, T. C., Sechler, E. E., eds.) pp. 59–80. New Jersey: Prentice-Hall 1974.
Nemeth, M. P.: Nondimensional parameters and equations for buckling of symmetrically laminated thin panels shallow shells. NASA TM 104060, March 1991.
de Souza, M. A.: Post-buckling vibration characteristics of structural elements. Engng. Struct.9, 134–137 (1987).
de Souza, M. A.: The effects of initial imperfections and changing support conditions on the vibration of structutal elements liable to buckling. Thin-Walled Struct.5, 11–23 (1987).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Librescu, L., Chang, M.Y. Effects of geometric imperfections on vibration of compressed shear deformable laminated composite curved panels. Acta Mechanica 96, 203–224 (1993). https://doi.org/10.1007/BF01340710
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01340710