abstract
A combined treatment method is devised for raising the plasticity of refractory metals on the basis of a study of relevant papers.
Similar content being viewed by others
References
A. V. Dobromyslov, R. V. Churbaev, and G. G. Taluts, “The plasticity of molybdenum as a function of pressure at various temperatures,” Fiz. Metallov i Metalloved.,68, No. 1, 170–176 (1989).
E. V. Ottenberg, A. N. Mironicheva, and G. S. Burkhanov, “Recrystallization in molybdenum deformed by forging and hydropressing,” Tsvet. Metally, No. 7, 86–87 (1988).
E. M. Savitskii, Yu. O. Tolstobrov, P. V. Makarov, et al., “The effects of deoxygenation on the structure and properties of vacuum-melted tungsten,” in: Alloys of Refractory and Rare Metals for Operation at High Temperatures [in Russian], Nauka, Moscow (1984), pp. 49–54.
V. G. Parshikov, T. A. Biryukova, and V. V. Gladilin, “The plasticity of molybdenum deoxygenated with boron, titanium, aluminum, and rare-earth metals,” in: Metallurgy of Tungsten and Molybdenum [in Russian], Metallurgiya, Moscow (1982), pp. 80–83.
B. L. Linetskii, A. V. Krupin, N. N. Blokhin, et al., “Plasticity and structural features of deformed and recrystallized tungsten single crystals,” in: Single Crystals of Refractory and Rare Metals, Alloys, and Compounds [in Russian], Nauka, Moscow (1977), pp. 194–201.
E. É. Zasimchuk and V. M. Zamyatin, “The behavior of boundary regions in plastic strain,” in: Highly Excited States in Crystals [in Russian], Sib. Ord. AN SSSR, Tomsk (1991), pp. 123–132.
M. A. Khusainov, The Cold Brittleness of Tungsten Made by Gas-Phase Deposition: Preprint [in Russian], Cherkassy (1989). Deposited at ON1TTÉKhIM, No. 66, 11.01.89.
L. S. Kosachev and S. S. Semiletov, “Raising the plasticity of heat-resistant tungsten alloys by heat treatment,” in: Alloys of Refractory and Rare Metals for Operation at High Temperatures [in Russian], Nauka, Moscow (1984), pp. 71–81.
I. N. Potapov, É. N. Larin, V. A. Nravikov, et al., “Effects of homogenizing annealing on the properties of lowalloyed molybdenum,” Nauch. Tr. Mosk. Inst. Stali i Splavov, No. 145, 86–88 (1982).
Ya. M. Viterskii and E. F. Sil'nikova, “Effects of thermomechanical treatment on the properties and textures of molybdenum alloys,” Tr. Leningr. Politekhn. Inst., No. 359, 64–70 (1977).
L. D. Korotaev, A. N. Tyumentsev, I. A. Danyushenkov, et al., “Nature of the secondary phases and aspects of plasticity in low-alloyed Mo,” in: Physics of Brittle Failure [in Russian], Inst. Probl. Materialovedeniya AN Ukr. SSR, Kiev (1976), pp. 118–123.
V. V. Darmograi, Yu. V. Mil'man, A. P. Rachek, et al., “Effects of annealing on the structure and layering tendency in low-alloy molybdenum,” Metallofizika, Issue54, 32–38 (1974).
A. D. Vasil'ev, Yu. V. Mil'man, M. M. Nerodenko, et al., “A fractographic study of the failure in deformed molybdenum,” ibid.68, 61–71 (1977).
V. I. Trefilov (ed.), Structure, Texture, and Mechanical Properties of Deformed Molybdenum Alloys [in Russian], Naukova Dumka, Kiev (1983).
B. I. Shapoval, A. I. Somov, G. F. Tikhinskii, et al., “Effects of annealing in molten copper on the plastic properties of molybdenum.“ Fiz. i Khim. Obrab. Materialov, No. 4, 77–84 (1982).
N. P. Bondarenko, A. I. Somov, and B. I. Shapoval, Authors' Cert. 555166 (USSR): A Method of Heat Treatment of Molybdedenum and Tungsten [in Russian], Otkrytiya. Izobret., No. 37 (1977).
L. S. Kosachev, Yu. V. Mil'man, V. D. Pushkin, et al., “Effects of annealing on the structure, cold brittleness, and mechanical properties of carbide-hardened tungsten,' Izv. AN SSSR, Metally, No. 2, 97–101 (1987).
K. B. Povarova and E. K. Zavarzina, “Effects of heat treatment on the structure and properties of molybdenum alloys,” ibid., No. 5, 118–126 (1989).
M. V. Mal'tsev, Heat Treatment of Refractory Rare Metals and Their Alloys [in Russian], Metallurgiya, Moscow (1974).
Noda Tetsuji, Okada Masatoshi, and Watanabe Reji, Japanese Patent 57-512554. Improving the Mechanical Properties of Embrittled Molybdenum. Publ. 26.03.82.
R. M. Mikhridinov, N. A. Gershkovich, and V. A. Korvukhin, “A method of improving the plasticity of molybdenum,” Tsvet. Metallurgiya, No. 1, 41–42 (1992).
P. Burek, DDR Patent 114928. Verfahren zur Duktilitartbarem molybdan and molybdanlegierungen. Publ. 12.11.80.
V. I. Trefilov, V. A. Lavrinenko, V. L. Tikush, et al., “Thermochemical treatment of tungsten and molybdenum in a flow of low-pressure atomic hydrogen under irradiation,” Dokl. AN SSSR,293, No. 4, 922–924 (1987).
S. A. Golovanenko, S. B. Maslenkov, V. M. Chub, et al., Authors' Cert. 329250 (USSR). A Method of Purifying Metallic Materials from Interstitial Elements [in Russian], Otkrytiya, Izobret., No. 7, 118 (1972).
Yu. V. Dzyadykevich, “Refining refractory metals from interstitial impurities,” Izv. AN Rossii, Metally, No. 1, 181–185 (1992).
E. M. Savitskii (ed.), Rare-Earth Metal Alloys [in Russian], Izd. AN SSSR, Moscow (1962).
Additional information
Ternopol Pedagogic Institute. Translated from Poroshkovaya Metallurgiya, Nos. 5–6, pp. 107–111, May-June, 1996. Original article submitted March 28, 1994.
Rights and permissions
About this article
Cite this article
Dzyadikevich, Y.V., Gorbatyuk, R.M. Ways of increasing the plasticity of molybdenum, tungsten, and alloys based on them (review). Powder Metall Met Ceram 35, 311–314 (1996). https://doi.org/10.1007/BF01328841
Issue Date:
DOI: https://doi.org/10.1007/BF01328841