Abstract
Spraying parameters for plasma coatings made from commercial magnetite powders of different particle size on steel and titanium substrates are studied. On the basis of microstructure, phase composition, and bond strength as functions of the initial particle size optimum spraying parameters are obtained for preparing magnetite coatings 300–1500 μm thick. The results are used for spraying active layers on sheets 250 × 500 mm in size for electrodes in electrolytic water purification.
Similar content being viewed by others
References
USA Patent 4515674. Electrode for Cationic Deposition Coating, Tayota Yidosha K. K., Published 07.05.85.
A. V. Slipchenko, V. V. Maksimov, and L. K. Kul'skii, “Modem low-wear anodes and perspectives for developing electrochemical technology for water treatment,” Khim. i Tekhnol. Vody,15, No. 3, 180–231 (1993).
D. B. Dixon, “Interaction of alkaline-earth metal ions—magnetite,” Colloids and Surfaces,13, No. 4, 273–286 (1985).
V. F. Karpukhin, Z. L. Faingol'd, V. V. Zav'yalova, et al., “Electrochemical purification of local waster water in the production of antibiotics from surfactants,” in: Purification of Waste Waters in Water Supply Systems and Circulating Water Usage [in Russian], Leningrad (1985), pp. 73–76.
A. V. Slipchenko, O. S. Sivluk, and Yu. S. Boranov, “Effect of the anion composition of electrolyte on the release of active chlorine by a current in the electrolysis of marine and saline water,” Khim. i Tekhnol. Vody,9, No. 2, 150–152 (1987).
R. Stai, M. Shibya, T. Matsumura, and J. Ichi, “Electrical resistivity of magnetite anodes,” J. Electrochem. Soc.,118, No. 10, 1709–1711 (1971).
G. V. Samsonov, Physicochemical Properties of Oxides [in Russian], Metallurgiya, Moscow (1969).
N. A. Toropov, V. P. Barzakovskii V. V. Lapin, et al., Composition Diagrams for Silicate Systems [in Russian], Nauka, 1 (1972)
Additional information
Materials Science Institute, Ukrainian Academy of Sciences, Kiev. Translated from Poroshkovaya Metallurgiya, Nos. 5–6, pp. 52–56, May-June, 1996. Original article submitted June 3, 1994.
Rights and permissions
About this article
Cite this article
Kadyrov, V.K., Terent'ev, A.E., Shvedova, L.K. et al. Plasma coatings made from magnetite and their use in electrolysis installations. Powder Metall Met Ceram 35, 264–267 (1996). https://doi.org/10.1007/BF01328830
Issue Date:
DOI: https://doi.org/10.1007/BF01328830