Abstract
A constrained optimisation analysis of the multipass turning operation, based on a combined cost and time objective is outlined. The work involves development of solution strategies for multipass multicriterion problems using geometric programming, dynamic programming and the weighting coefficient method. A parametric study is presented to demonstrate the utility and applicability of such strategies. An algorithm is developed which can be easily and effectively applied to investigate the optimal number of passes and corresponding parameters such as speed, feed and depth of cut in each pass for multipass, multicriterion plain turning problems. The constraints considered are speed, feed, depth of cut, surface finish, power, temperature, force and deflection. The available discrete values of speed and feed for a particular machine are involved to get the feasible optimal solution.
Similar content being viewed by others
References
H. Eskicioglu, M. S. Nisli, S. E. Kilic, “An application of geometric programming to single pass turning operation”, 25th IMTDR, 1985.
J. S. Agapiou, “The optimization of machining operation based on combined criterion, Part-I: The use of combined objectives in single pass operations”, Journal of ASME for Industry, 1992.
D. B. Naik and A. K. Dave, “Multicriterion optimization in single pass turning”, Proceedings ICAUTO-95, 1995.
B. Gopal Krishnan, Faiz-Al-Khayyal, “Machine parameter selection for turning with constraints, an analytical approach based on geometric programming”, International Journal of Production Research, 29(9), pp. 1897–1908, 1991.
A. M. Abuelnaga and M. A. El-Darding, “Optimization methods for metal cutting”, International MTDR, 24(1), pp. 11–18, 1984.
J. S. Agapiou, “The optimization of machining operation based on a combined criterion, Part-II: Multipass operation”, Journal of ASME for Industry, 114, pp. 508–513, 1992.
P. K. Kee, “Alternative optimization strategies and CAM software for multipass rough turning operations”, International Journal of Advanced Manufacturing Technology, 10, pp. 287–298, 1995.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naik, D.B., Dave, A.K. Multipass, multicriterion optimisation in turning. Int J Adv Manuf Technol 14, 544–548 (1998). https://doi.org/10.1007/BF01301697
Issue Date:
DOI: https://doi.org/10.1007/BF01301697