Refractories from Savinsk Magnesite

Conclusions

Savinsk magnesite fired in rotary kilns can be used to obtain dense magnesite powder with a porosity of less than 10% (without reducing the furnace output and substantially increasing the firing temperature). The powder is suitable for producing magnesia refractories for high-duty purposes. On the basis of dense powder obtained from Savinsk magnesite periclase-spinel refractories were produced with relatively high working properties.

The wear of the products made from Savinsk magnesite in a roof of a 400-ton open hearth furnace is 22.7% less than in products made from Satkinsk magnesite. Subsequently it will be desirable to test products in a 600-ton open hearth furnace.

This is a preview of subscription content, access via your institution.

Literature cited

  1. 1.

    T. A. Aleksandrova and D. V. Novkova, Laboratory-Engineering Investigation of Savinsk Magnesites, Report from All-Union Institute of Refractories [in Russian] (1961).

  2. 2.

    A. P. Sarmin and E. A. Yur'eva, Laboratory Study of the Quality of Savinsk Magnesite, Report of the All-Union Institute of Refractories [in Russian] (1967).

  3. 3.

    N. N. Timofeev and P. S. Potemkin, Industrial Testing of Savinsk Magnesite, Report of All-Union Institute Refractories [in Russian] (1967).

Download references

Author information

Affiliations

Authors

Additional information

Translated from Ogneupory, No. 9, pp. 2–7, September, 1970.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Timofeev, N.N., Shumeiko, R.M., Anokhina, A.D. et al. Refractories from Savinsk Magnesite. Refractories 11, 536–540 (1970). https://doi.org/10.1007/BF01290539

Download citation

Keywords

  • Porosity
  • Furnace
  • Magnesia
  • Magnesite
  • Test Product