Summary
An approximate analytical 2-D solution for the strain field components ɛ11, ɛ12 and ɛ22 occurring in a cubic material due to a coherently bonded shear eigenstrained inclusion of cylindrical geometry was obtained by means of Continous Fourier Transforms (CFT). A Discrete Fourier Transform (DFT) based numerical model was used in order to test the validity of the results. For the case where the cylindrical inclusion and the surrounding media are elastically homogeneous and the orientation of their principal crystal axes are the same, a correlation between the analytical and numerical models is demonstrated, both for strongly and weakly anisotropic materials. Moreover, the strain fields within the inclusion are shown to be of homogeneous isotropic type. Finally, an expression for the closed-form strain energy of two cylindrical inclusions at arbitrary radius and angle was derived, and then used to determine the minimum energy configuration for the system.
Similar content being viewed by others
References
Heuer, A. H., Rühle, M.: Phase transformations in ZrO2-containing ceramics: I, The instability of c-ZrO2 and the resulting diffusion-controlled reactions. In Science and Technology of Zirconia. Advances in Ceramics (12) (Claussen N., Rühle, M., Heuer, A. H., eds.). The American Ceramic Society, Inc. USA, pp. 1–13 (1983).
Stevens, R.: Zironia and zirconia ceramics. 2nd ed. Magnesium Elektron, Twickenham, UK 1986.
Mader, W.: On the electron diffraction contrast caused by large inclusions. Philosophical Magazine A,55(1), 59–83 (1987).
Kriven, W. M.: The transformation mechanism of spherical zirconia particles in alumina. In: Science and Technology of Zirconia. Advances in Ceramics (12) (Claussen, N., Rühle, M., Heuer, A. H., eds.). The American Ceramic Society, Inc. USA, pp. 64–77 (1983).
Hazotte, A., Denis, S.: Calculation of Internal Mismatch Stresses Related to γ′ Precipate Morphology in Nickel-Based Superalloys. Proc. 4th Conference on Residual Stresses, June 8–10, 1994, Baltimore, Maryland, U.S.A. Society for Experimental Mechanics, Bethel, CT, 1994, pp. 825–833.
Dreyer, W., Müller, W. H., Olschewski, J.: An approximate 2D-analytical solution for the stresses and strains in eigenstrained cubic materials. Acta Mech.136 (3–4), 171–192 (1999).
Müller, W. H., Neumann, S.: An approximate analytical 3D-solution for the stresses and strains in eigenstrained cubic materials. Int. J. Solids Structures35 (22), 2931–2958 (1998).
Khachaturyan, A. G., Shatalov, G. A.: Elastic-interaction potential of defects in a crystal. Soviet Physics-Solid State11 (1), 118–123 (1969).
Mayo, W. E., Tsakalakos, T.: The influence of elastic strain energy on the formation of coherent hexagonal phases. Metallurgical Transactions A,11A, 1637–1644 (1980).
Chen, L., Wang, Y., Khachaturyan, A. G.: Transformation-induced elastic strain effect on the precipitation kinetics of ordered intermetallics. Philosophical Magazine Letters64 (5), 241–251 (1991).
Chen, L., Wang, Y., Khachaturyan, A. G.: Kinetics of tweed and twin formation during an ordering transition in a substitutional solid solution. Philosophical Magazine Letters65 (1), 15–23 (1992).
Khachaturyan, A. G., Wang, Y., Wang, H. Y.: Metastable phases and nuclei: computer modeling. Proc. Int. Meeting on Reactive Phase Formation at Interfaces and Diffusion Process, Aussois, France (1993).
Khachaturyan; A. G.: Theory of structural transformation in solids. New York: Wiley 1983.
Moulinec, H., Suquet, P.: A FFT-based numerical method for computing the mechanical properties of composites from images of their microstructure. IU TAM Symposium on Microstructure-Property Interactions in Composite Material 235–246, Dordrecht: Kluwer Academic Publishers, 1995.
Moulinec, H., Suquet, P.: A numerical method for computing the overall response of nonlinear composites with complex microstructure. Comp. Meth. Appl. Mech. Eng.157 (1–2), 69–94 (1998).
Michel, J. C., Moulinec, H., Suquet, P.: Effective properties of composite materials with periodic microstructure: a computational approach. Comp. Meth. Appl. Mech. Eng.172 (1–4), 109–143 (1999).
Mebed, A. M., Koyama, T., Miyazaki, T.: Computer simulation of A2/B2 second-order phase transition based on the Khachaturyan diffusion equation. J. Mat. Science32, 5797–5804 (1997).
Koyama, T., Miyazaki, T.: Computer simulation of phase decomposition in two dimensions based on a discrete type nonlinear diffusion equation. Materials Transactions, JIM,39 (1), 169–178 (1998).
Dreyer, W., Müller, W. H.: A study of coarsening in tin/lead solders. Int. J. Solids Structures37 (28), 3841–3871 (2000).
Herrmann, K. P., Müller, W. H., Neumann, S.: Linear and elastic-plastic fracture mechanics revisited by use of Fourier Transforms-theory and application. Computational Materials Science16, 186–196 (1999).
Müller, W. H.: Fourier transforms and their application to the formation of textures and changes of morphology in solids. Proc. IUTAM Symposium on Transformation Problems in Composite and Active Materials, Cairo, March 1997, Kluwer Academic Publishers. Dordrecht, Netherlands, pp. 61–72, 1998.
Mura, T.: Micromechanics of defects in solids. 2nd rev. ed. Dordrecht: Martinus Nijhoff Publishers, 1987.
Pang, T.: An introduction to computational physics. Cambridge, Mass.: Cambridge University Press 1997.
Gradshteyn, I., Rhzhik, I. M.: Tables of integrals, series and products. 2nd ed. Academic Press 1980.
Author information
Authors and Affiliations
Additional information
Dedicated to Professor Krzysztof Wilmanski on the occasion of his 60th birthday
Rights and permissions
About this article
Cite this article
Brown, C.M., Müller, W.H. An approximate 2-D solution for the shear-induced strain fields in eigenstrained cubic materials. Acta Mechanica 146, 151–167 (2001). https://doi.org/10.1007/BF01246730
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01246730