Summary
A Portable Shear Box for Testing Rock Joints
The authors describe their early work on the development and operation of a portable shear box for testing rock joints. Experiences with sampling, roughness assessments, testing techniques and test interpretation using the shear box are outlined. More recent modifications and developments are also discussed, and a number of test results are presented.
Zusammenfassung
Ein transportables Schergerät zur Untersuchung von Gesteinsklüften
Die Verfasser schildern ihre Arbeit an der Entwicklung und Verwendung eines transportablen Schergerätes zur Untersuchung von Gesteinsklüften. Es werden die Erfahrungen bei der Probengewinnung, mit der Abschätzung der Rauhigkeit, mit den Untersuchungsverfahren und der Versuchsauswertung während des Einsatzes der Scherbüchse besprochen. Außerdem werden neuere Abänderungen und Entwicklungen des Gerätes erörtert und mehrere Versuchsergebnisse vorgelegt.
Résumé
Une boîte de cisaillement portative servant aux essais des joints rocheux
Les auteurs donnent une description de leur travaux lors du développement et de l'utilisation d'un appareil de cisaillement destiné à l'examen de joints des roches. Ils communiquent leurs expériences concernant les prélèvements d'éprouvettes, l'estimation de les méthodes d'essai et l'exploitation des résultats d'essai à l'aide de l'appareil de cisaillement décrit. D'autre part on décrit les modifications et améliorations récentes de l'appareil et on présente les résultats d'essai.
Similar content being viewed by others
Appendix I — References
Barton, N. R.: A relationship between joint roughness and joint shear strength. Proc. Symp. on Rock Fracture. ISRM, Paper 1–8 (1971).
Fecker, E., and N. Rengers: Measurement of large scale roughness of rock planes by means of a profilograph and geological compass. Proc. Symp. on Rock Fracture ISRM Paper 1–18 (1971).
Franklin, J. A., E. Broch, and G. Walton: Logging the mechanical character of rock. Trans. Instn. Min. Metall., Sect. A, Vol. 80, pp. A 1-A 9 (1971).
Goodman, R. E.: The deformability of joints in “Determination of the in situ modulus of deformation of rock” — ASTM STP 477, pp. 174–196 (1970).
Goodman, R. E.: The mechanical properties of joints. To be published. Proc. 3rd Congress of ISRM (1974).
Hoek, E.: Estimating the stability of excavated slopes in opencast mines. Trans. Instn. Min. Metall., Sect. A, Vol. 79, pp. A 109-A 132 (1970).
Hoek, E.: “Influence of Rock Structure on the Stability of Rock Slopes”. Proc. of the First Int. Conf. on Stability in Open Pit Mining (Vancouver). Am. Inst. of Min. Eng. (1971).
Hoek, E., and J. W. Bray: Rock slope engineering. Inst. Mining and Metall. London (1973.)
Horn, H. M., and D. U. Deere: Frictional Characteristics of Minerals. Geotechnique, Vol. 12, pp. 319–335 (1962).
Herington, J.: Personal communication (1973).
Jennings, J. E. B., and A. MacG. Robertson: The stability of slopes cut into natural rock. Proc. 7th Intnl. Conf. Soil Mech., Mexico City, Aug. (1969).
Kutter, H. K.: Results of Laboratory Direct Shear Tests on Four Rock Types. Imp. Coll. Rock. Mech. Rept. To be published (1973).
Patton, F. D.: Multiple modes of shear failure in rock. Proc. Ist. Int. Cong. Rock Mech., Vol. 1, pp. 509–513 (1966).
Piteau, D. R.: Geological factors significant to the stability of slopes cut in rock in planning open pit mines. P. W. J. van Rensburg, ed. A. A. Balkema, Amsterdam (1971).
Rengers, N.: Influence of surface roughness on the friction properties of rock planes. Proc. 2nd Cong. Intl. Soc. Rock Mech., Belgrade, Vol. 1, Paper 1–31 (1970).
Richards, L. R.: Strength properties of Delabole slates. Imperial College. Rock Mech. Res. Report. No. 23. To be published (1973).
Richards, L. R.: Personal communication (1973).
Ross-Brown, D. M.: Aspects of Slope design in open pit mining. Ph. D. Thesis, University of London (1973).
Stimpson, B.: Personal communication (1972).
Walton, G.: Discussion on paper “Estimating the stability of excavated slopes in opencast mines” by E. Hoek. Trans. Inst. Min. Metall. (London) 80, pp. A 75-A 76 (1971).
Walton, G., and D. M. Ross-Brown: An engineering geological investigation at the Hilton mine. Bulletin Assoc. of Eng. Geologists. Spring 1974. In press.
Walton, G.: Stability of slopes in opencast coal workings. Ph. D. Thesis, in preparation, University of London (1974).
Author information
Authors and Affiliations
Additional information
With 14 Figures
Rights and permissions
About this article
Cite this article
Ross-Brown, D.M., Walton, G. A portable shear box for testing rock joints. Rock Mechanics 7, 129–153 (1975). https://doi.org/10.1007/BF01246721
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01246721