Summary
Rock Mass Mechanical Characteristics in an Opencut at Bor Copper Mine
Preliminary testing for the design of the new opencut, which will go to a depth of about 300 m, included testing rock mechanical characteristics. The character of the preliminary testing demanded by an engineering undertaking of this scale and the fundamental structural and physical properties of rock masses (fissuring, anisotropy, heterogeneity, natural stresses) are discussed and it is emphatically concluded that priority should go to in situ testing. Results are presented of determinations of the velocity of propagation of longitudinal elastic waves, elasticity modulus, coefficient of damage and shear strength parameters.
Zusammenfassung
Erforschung von Charakteristiken der Felsmassen am Tagebau des Kupferbergwerks Bor
Die Erforschung mechanischer Charakteristiken erfolgte im Gefüge von Forschungsarbeiten zum Projekt des neuen mit vorgesehener Tiefe von etwa 300 m geplanten Tagebaues. Von der Analyse des Charakters von Forschungsarbeiten für ein derartig großes technisches Vorhaben sowie auch der Analyse von grundlegenden strukturellen und physikalischen Charakteristiken der Felsmassen (Rissigkeit, Anisotropie, Heterogenität und Naturspannungszustand) ausgehend, wurde klar auf die Orientierungsnotwendigkeit der Forschungen von mechanischen Charakteristiken auf Untersuchungen in situ hingewiesen. Als Untersuchungsergebnisse werden aufgeführt: Ausbreitungsgeschwindigkeit von elastischen longitudinalen Wellen, Elastizitätsmoduln, Beschädigungskoeffizienten und Parameter des Scherwiderstandes.
Résumé
Etude des caractéristiques mécaniques des roches à la minière de cuivre de Bor à ciel ouvert
L'étude des caractéristiques mécaniques a été faite dans le cadre des investigations pour le projet d'une nouvelle minière dont la profondeur prévue est de 300 m approximativement. L'analyse du caractère des investigations nécessaires pour un projet technique d'une telle portée, ainsi qu'une analyse des caractéristiques structurales et physiques des roches (fissuration, anisotropie, hétérogénéité, contraintes naturelles) ont montré indubitablement que les investigations des caractéristiques mécaniques doivent être exécutés in situ. On a présenté aussi les résultats de ces investigations: vitesse de propagation des ondes élastiques longitudinales, module d'élasticité, coéfficient d'endommagement, et les paramètres de la résistence au cisaillement.
Similar content being viewed by others
References
Čolić, B.: Ispitivanje otpornosti na smicanje uzoraka stenske mase na profilu brane Djerdap. II Yugoslav Symposium on Rock Mechanics and Underground Works, Skopje, 15–21 (1967).
Čolić, B.: Rudnik bakra Bor. Površinski kop. Seizmicka ispitivanja. Not published. Documentation of the “Jaroslav Černi” Institute for Development of Water Resources, Beograd (1968).
Jakosky, J. J.: Exploration Geophysics. Newport Beach, California: Trija Publishing Company, 1960.
Kujundžić, B., and L. Jovanović: Terenski opiti smicanja i klizanja u velikoj razmeri. Transactions, “Jaroslav Černi” Institute 1, 5–19 (1954).
Kujundžić, B., and L. Javonović: Istražni radovi za potrebe projektovanja i gradjenja hidroelektrana. Elektroprivreda, 7–8, Beograd (1968).
Lokin, P.: Inzenjerskogeološka istraživanja površinskog kopa rudnika bakra Bor. Not published — Documentation of the Bor Copper Mine (1968).
Radosavljević, Ž.: Rudnik bakra Bor. Površinski kop. Geotehnicka ispitivanja. Book II. Not published — Documentation of the “Jaroslav Černi” Institute, Beograd (1968).
Author information
Authors and Affiliations
Additional information
This paper was communicated to the 3rd Yugoslav Symposium on Rock Mechanics and Underground Works — Tuzla, Yugoslavia.
With 7 Figures
Rights and permissions
About this article
Cite this article
Kujundžić, B., Čolić, B. Rock mass mechanical characteristics in an opencut at bor copper mine. Rock Mechanics 8, 153–167 (1976). https://doi.org/10.1007/BF01239812
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01239812