Summary
A simplified method has been developed to determine molecular weight by using a constant volume of solvent and using polystyrene as a standard, molecular weights up to 51000 can be obtained with less than 2% error from a graph. If calculated by computer, 5% error is the maximum.
Zusammenfassung
Ein vereinfachtes Verfahren unter Verwendung eines konstanten Lösungsmittelvolumens sowie von Polystrol als Standardsubstanz ermöglicht die Bestimmung von Molekulargewichten bis zu 51 000 mit einer Fehlerbreite von 2% an Hand einer Eichkurve. Bei Berechnung mit einem Computer ist die maximale Fehlerbreite 5%.
Similar content being viewed by others
References
Mechrolab Vapor Pressure Osmometer Instruction Manual —Operat-ing Principle of the Thermistor Probe set at 37°.
Hewlett-Packard Applications Lab Report 1009.
Hewlett-Packard Vapor Pressure Osmometer Mechrolab 302.
Wright-Patterson AFB Computer Center.
Author information
Authors and Affiliations
Additional information
This work was supported by the U. S. Air Force under Contract #F33615-73-C-5013.
Rights and permissions
About this article
Cite this article
Harden, W.H. Microdetermination of molecular weight in high molecular weight polymers soluble in benzene at 37° C. Mikrochim Acta 64, 449–454 (1975). https://doi.org/10.1007/BF01219212
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01219212