Literature cited
I. I. Novikov, G. V. Gubarev, V. P. Zakharenko, et al., “Use of structural plastics in compressors,” in: Compressor Designing [in Russian], Central Institute of Scientific and Technical Information on Chemical and Petroleum Engineering, Moscow (1982), Series KhM-5.
Technical Specification 26-12-428-83. Casting Material TNK-2-G5 [in Russian], All-Union Research Institute of Compressors (1983).
“Polymer compositions for piston rings,” USSR Inventor's Certificate No. 621,705, MKI C 08 L 77/02.
V. A. Kuz'min, V. P. Dolya, A. N. Potetnya, et al., “Use of glass-filled polyamides for producing compressor piston rings,” Kholod. Tekh., No. 9, 19–21 (1983).
V. V. Lapshin, Principles of Processing Thermoplastics by Pressure Casting [in Russian], Khimiya, Moscow (1974).
All-Union Standard 26-12-2010-78. Plastic Rings for Piston Compressor. Technical Specifications [in Russian], All-Union Research Institute of Compressors (1978).
“Rod compaction,” USSR Inventor's Certificate No. 723,274, MKI Z 16 J 15/32.
A. M. Bogdanov, V. P. Dolya, and L. M. Stopchak, Packing Gland for Piston Rings [in Russian], Interregional Local Center, Khar'kov (1985), Information Leaflet No. 85-83.
N. M. Gulyi, I. A. Elfimov, M. I. Khomovskii, et al., “Rod compaction using angular elements,” Khim. Neft. Mashinostr., No. 4, 33 (1986).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 4, pp. 26–28, April, 1989.
Rights and permissions
About this article
Cite this article
Kuz'min, V.A., Potetnya, A.N. & Dolya, V.P. Specific features of producing packings from polyamides with fillers. Chem Petrol Eng 25, 211–214 (1989). https://doi.org/10.1007/BF01218814
Issue Date:
DOI: https://doi.org/10.1007/BF01218814