Zusammenfassung
Die Konstruktion und Anwendung eines Absorptionsröhrchenträgers für die C-H-Bestimmung wird beschrieben. Die verkleinerten Absorptionsröhrchen werden in Silikongummidichtungen eingepreßt und durch rostfreie Stahlröhrchen verbunden. Dadurch erübrigt sich das Berühren und Abwischen der Absorptionsröhrchen, die nur mit einer Pinzette gehandhabt werden. Bei einer Substanzmenge von 2 bis 3 mg läßt sich die Analysendauer auf 17 Minuten herabsetzen.
Summary
The construction and use of an absorption tube carrier for C-H determination are described. The scaled-down absorption tubes are pressed into silicone rubber seals and connected by narrow stainless steel tubes. This eliminates the need for handling and wiping the absorption tubes that are handled only with forceps. The time required for the determination is reduced to 17 minutes when the sample weighs 2–3 mg.
Résumé
On décrit la construction et l'emploi d'un support pour les tubes à absorption, pour le dosage C-H. On coïnce les tubes, dont les dimensions ont été encore réduites, dans un joint en caoutchouc siliconé et on le relie par un petit tube en acier inoxydable. On réduit ainsi le toucher et le nettoyage des tubes à absorption, manipulés seulement avec des pinces. La durée de l'analyse s'élève à 17 minutes pour une quantité de substance de 2 à 3 mg.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Meier, E. Absorptionsröhrchenträger zur C-H-Bestimmung nach Pregl. Mikrochim Acta 51, 1003–1006 (1963). https://doi.org/10.1007/BF01217631
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF01217631