Zusammenfassung
Das Indikatorsystem mit polarisierten Wismutelektroden2,3 wurde mit Erfolg auf die Fällungstitration zur Sulfatbestimmung nachBaudisch und Mitarb. angewandt. Dieses System hat seine hohe Empfindlichkeit durch die Anzeige der gegen den Titrationsendpunkt angestiegenen Acidität einer bereits sauren Reaktionslösung erwiesen. Der Vorteil des Wismut-Indikatorsystems gegenüber dem System Glaselektrode/ges. Kalomelelektrode liegt in seinem niedrigen Preis und der mechanischen Widerstandsfähigkeit. Deshalb ist die beschriebene Methode besonders geeignet für Reihenanalysen.
Summary
The indicating system consisting of polarised bismuth electrodes previously suggested by us, was now applied for the titrimetric precipitation determination of sulfate afterBaudisch et al. The system described showed enough sensitivity to indicate the endpoint on the basis of growing acidity during the titration. Relating to the glass/SCE system, the priority of bismuth pair of electrodes lies in its low price and mechanical strength especially required for routine determinations.
Literatur
J. Baudisch, G. Beilstein undH. E. Neuenhausen, Z. analyt. Chem.231, 235 (1968).
M. S. Jovanović undD. Bakale, Z. analyt. Chem.244, 101 (1969).
M. S. Jovanović, L. J. Bjelica undA. Marinković, Bull. soc. chim. Beograd34, 435 (1969).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jovanović, M.S., Gaál, F.F. & Bjelica, L.J. Fällungstitration zur Sulfatbestimmung mit Hilfe eines Indikatorsystems mit Wismutelektroden. Mikrochim Acta 59, 778–782 (1971). https://doi.org/10.1007/BF01217105
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01217105