Abstract
The generalized layout optimization method is applied to nonlinear problems. The algorithm was originally invented by Bendsøe and Kikuchi (1988), where an admissible design domain is assumed to be composed of periodic microstructures with tiny cavities; the sizes and the rotational angle of the cavities are defined as design variables which are optimized to minimize the applied work. The macroscoic material tensor of the porous material is calculated by the homogenization method for the sensitivity analysis. In order to apply it to nonlinear problems, we present a 2-D database of the material tensor calculated by the elasto-plastic homogenization method and an interpolation technique of the database for the practical computation. Several numerical examples of 2-D structures and a thin shell are shown to demonstrate the effectiveness of our algorithms. The algorithm is also extended to the finite deformation problems, and a practical optimized design is exhibited.
Similar content being viewed by others
References
Bendsøe, M.P.; Kikuchi, N. 1988: Generating optimal topologies in structural design using a homogenization method.Comp. Meth. Appl. Mech. Engrg. 71, 197–224
Bendsøe, M.P.; Diaz, A.R.; Kikuchi, N. 1993: Topology and generalized layout optimization of elastic structures. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology design of structures, pp. 159–205. Dordrecht: Kluwer
Diaz, A.R.; Kikuchi, N. 1992: Solutions to shape and topology eigenvalue optimization problems using a homogenization method.Int. J. Num. Meth. Engrg. 35, 1487–1502
Guedes, J.M.; Kikuchi, N. 1990: Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element method.Comp. Meth. Appl. Mech. Engrg. 83, 143–198
Lions, J.L. 1981:Some method in the matheamtical analysis of systems and their control. New York: Gordon and Breach Science Publ.
Ma, Z.-D.; Kikuchi, N.; Cheng, H.-C. 1995: Topological design for vibrating structures.Comp. Meth. Appl. Mech. Engrg. 121, 259–280
Ma, Z.-D.; Kikuchi, N.; Hagiwara, I. 1993: Structural topology and shape optimization for a frequency response problem.Comp. Mech. 13, 157–174
Suzuki, K.; Kikuchi, N. 1991: A homogenization method for shape and topology optimization.Comp. Meth. Appl. Mech. Engrg. 93, 291–318
Suzuki, K.; Kikuchi, N. 1992:Generalized layout optimization of three-dimensional shell structures. Geometric aspects of industrial design. Philadelphia: SIAM, 62–68
Terada, K.; Yuge, K.; Kikuchi, N. 1995: Elastoplastic analysis of composite materials using the homogenization method (1-st Report, Formulation, in Japanese).Trans. Japan Soc. Mech. Engineers, 61-590, A, 2199–2205
Terada, K.; Yuge, K.; Kikuchi, N. 1996: Elastoplastic analysis of composite materials using the homogenization method (2-nd Report, Numerical analysis, in Japanese).Trans. Japan Soc. Mech. Engineers, 62-601, A, 2072–2079
Yuge, K.; Kikuchi, N. 1995: Optimization of a frame structure subjected to a plastic deformation.Struct. Optim. 10, 197–208
Yuge, K.; Kikuchi, N. 1996: Optimal design of a two-dimensional structure subjected to a plastic deformation. Part 1, Formulation (in Japanese).Trans. Japan Soc. Mech. Engineers, 62-600, A, 1910–1917
Yuge, K.; Kikuchi, N.; Iwai, N. 1997: Optimal design of a two-dimensional structure subjected to a plastic deformation (2-nd Report, Numerical Examples, in Japanese).Trans. Japan Soc. Mech. Engineers, 63-610, A, 1340–1347
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yuge, K., Iwai, N. & Kikuchi, N. Optimization of 2-D structures subjected to nonlinear deformations using the homogenization method. Structural Optimization 17, 286–299 (1999). https://doi.org/10.1007/BF01207005
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01207005