Abstract
The Stochastic Optimization Problem is well known in mathematics and operations research. Due to increasing demands for performance improvement together with reduced weight and costs the introduction of uncertainties into optimization problems in mechanical engineering is also necessary. In a number of papers this Stochastic Structural Optimization Problem is formulated and solved only within certain limiting assumptions. This paper presents a general definition of the Stochastic Structural Optimization Problem. Furthermore one solution technique based on reliability calculation is presented. With this technique the use of an augmented optimization loop based on Mathematical Programming is possible. The use of the developed tool for reliability calculations and optimization is demonstrated for complex mechanical structures.
Similar content being viewed by others
References
Chen X, Lind NC (1983) Fast probability integration by three-parameter normal tail approximation. Structural Safety 1:269–276
Ditlevsen O (1981) Principle of normal tail approximation. Journal of the Engineering Mechanics Division, ASCE, 107:1191–1208
Eschenauer HA (1985) Rechnerische und experimentelle Untersuchungen zur Strukturoptimierung von Bauweisen. Forschungslaboratorium für Angewandte Strukturoptimierung, Institut für Mechanik und Regelungstechnik, Universität-GH Siegen, Forschungsvorhaben der DFG, 1980–1984
Eschenauer HA, Koski J, Osyczka A (1990) Multicriteria design optimization. Springer-Verlag, Berlin
Eschenauer HA, Vietor T (1992) An augmented optimization procedure for stochastic optimization and its application to design with advanced materials. Proceedings of the 15th IFIP-Conference on System Modelling and Optimization, Zurich, Switzerland, September 2–6, 1991, Lecture Notes in Control and Information Sciences, 180, Springer-Verlag, Berlin, pp. 943–952
Fiessler B, Neumann H-J, Rackwitz R (1979) Quadratic limit states in structural reliability. Journal of the Engineering Mechanics Division. ASCE,:661–676
Haug EJ, Chio KK, Komkov V (1986) Design sensitivity analysis of structural systems. Academic Press, Orlando
Haugen EB (1979) Probabilistic mechanical design. John Wiley & Sons, New York
Hilton HH, Feigen M (1960) Minimum weight analysis based on structural reliability. Journal of the Aerospace Science 27(9):641–653
Hohenbichler M, Rackwitz R (1983) First-order concepts in system reliability. Structural Safety 1:177–188
Jha VK, Sankar TS, Bhat RB (1983) Computer aided synthesis of a satellite antenna structure with probabilistic constraints. Shock and Vibration Bulletin, US Naval Research Lab., May 1983, Proc. 53, Pt. 3 pp. 79–90
Kall P (1976) Stochastic linear programming. Springer-Verlag, Berlin
Maglaras GK, Nikolaidis E (1990) Integrated analysis and design in stochastic optimization. Structural Optimization 2:163–172
Marti K (1980) Adaptive Zufallssuche in der Optimierung. ZAMM 60:T357-T359
Marti K (1992) Stochastic optimization in structural mechanics. ZAMM 726:T452-T464
Melchers RE (1987) Structural reliability analysis and prediction. Ellis Horwood, Chichester
Moses F, Kinser DE (1967) Optimum structural design with failure probability constraints. AIAA Journal 5(6): 1152–1158
Murotsu Y, Yonezawa M, Oba F, Niwa K Optimum structural design under constraint on failure probability. ASME paper 79-DET-114 pp. 1–12
Nikolaidis E, Burdisso R (1988) Reliability based optimization: A safety index approach. Computers & Structures 28(6): 781–788
Pai SS (1990) Probabilistic structural analysis of a truss typical for space station. NASA Technical Memorandum 103277, 3rd Air Force/NASA Symposium on Recent Advances in Multidisziplinary Analysis and Optimization, San Francisco, California, September 24–26 pp. 1–9
Rackwitz R (1982) Practical probabilistic approach to design. Part II. Institute for Civil Engineering III, TU München, Report no. 72
Rackwitz R, Cuntze R (1987) Formulations of reliability-oriented optimization. Engineering Optimization 11:69–76
Schäfer E (1990) Interaktive Strategien zur Bauteiloptimierung bei mehrfacher Zielsetzung und Diskretheitsforderungen. Forschungslaboratorium für Angewandte Strukturopti-mierung, IMR, Dissertation, Universität-GH Siegen
Schuëller GI (1987) Einführung in die Sicherheit und Zuverlässigkeit von Tragwerken W. Ernst & Sohn, München
Schuëller GI, Stix R (1987) A critical appraisal of methods to determine failure probabilities. Structural Safety 4:293–309
Stenvers KH (1985) Stochastische Vektoroptimierung zur Auslegung von Tragwerks-strukturen. Forschungslaboratorium für Angewandte Strukturoptimierung, IMR, Dissertation, Universität-GH Siegen
Thoft-Christensen P, Murotsu Y (1982) Application of structural systems reliability theory. Springer-Verlag, Berlin
Vietor T (1994) Optimale Auslegung von Strukturen aus spröden Werkstoffen. Forschungslaboratorium für Angewandte Strukturoptimierang. Institut für Mechanik und Regelungstechnik, Dissertation, Universität-GH Siegen, FOMAAS, T04-02.94
Wets RJB (1985) Algorithmic procedures for stochastic optimization. In: Schittkowski K (ed.) Comp. mathematical programming, Springer-Verlag, Berlin, pp. 309–322
Wu YT (1985) Demonstration of a new, fast probability integration method for reliability analyis. Advances in Aerospace Structural Analysis, Papers of the Winter Annual Meeting, Miami Beach, FL, Nov. 17–22, ASME, pp. 63–73
Wu YT, Wirshing PH (1987) New algorithm for structural reliability estimation. Journal of Engineering Mechanics 113 (9):1319–1336
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vietor, T. Stochastic Optimization for mechanical structures. Mathematical Methods of Operations Research 46, 377–408 (1997). https://doi.org/10.1007/BF01194862
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01194862