Abstract
The Cartesian coordinate system used for the geometrical, dimensional and accuracy description of a part is critical for programming CNC machining and achieving the required tolerances. Datum surfaces, fixture design, workpiece positioning and orientation in the machine tool workspace are directly influenced by the system which is adopted. On the other hand, constraints imposed by the available machining axes accuracy capabilities (i.e. accuracy of the available machine tools for the particular job) and the always present minimum machining cost requirement cannot be readily incorporated into the relevant considerations.
In mechanical design, dimensional chains are frequent and observation of the specified tolerances — in conjunction with the geometrical ones — guarantees the part functionality. Definition of the workpiece zero point and the Cartesian coordinate system for CNC machining and/or measurement (CMM) and tolerance transfer to this system of the functional tolerances under the constraints mentioned is, as the industrial practice has shown, a difficult, tedious, experience demanding and time consuming task.
In the paper an approach which has been developed for a systematic handling of this important engineering problem is presented. It is shown that the proposed algorithm and its CAD implementation constitute efficient tools for the analysis of the possible part dimensioning solutions. The designation of that zero workpiece point (ZWP) and Cartesian coordinate system which provide for minimum machining accuracy cost and for acceptable tolerances lying well within the machine tool accuracy capabilities is thus achieved. The complete methodology is further demonstrated and discussed in a 2 1/2 D case study and appropriate conclusions are drawn.
Similar content being viewed by others
References
ISO 129, “Technical drawings — dimensioning — general principles, definitions, methods of execution and special indications”.
R. G. Willhelm and S. C. Y. Lu, “Tolerance synthesis to support concurrent engineering”,Annals of the CIRP 41(1), pp. 197–200, 1992.
B. K. A. Ngoi, “Applying linear programming to tolerance chart balancing”,International Journal of Advanced Manufacturing Technology 7, pp. 187–192, 1992.
J. R. He and P. R. Gibson, “Computer aided geometrical dimensioning and tolerancing for process-operation planning and quality control”,International Journal of Advanced Manufacturing Technology 7, pp. 11–20, 1992.
J. R. He and G. C. I. Lin, “Computerised trace method for establishing equations for dimensions and tolerances in design and manufacture”,International Journal of Advanced Manufacturing Technology 7, pp. 210–217, 1992.
R. Weil, “Integrating dimensioning and tolerancing in computer aided process planning”,International Journal of Robotics and Computer-Integrated Manufacturing 4(1/2), pp. 41–48, 1992.
M. M. Sfantsikopoulos and S. C. Diplaris, “Coordinate tolerancing in design and manufacturing”,International Journal of Robotics and Computer-Integrated Manufacturing 8(4), pp. 219–222, 1991.
M. M. Sfantsikopoulos, “Compatibility of tolerancing”,International Journal of Advanced Manufacturing Technology 8, pp. 25–28, 1993.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sfantsikopoulos, M.M., Diplaris, S.C. & Papazoglou, P.N. Concurrent dimensioning for accuracy and cost. Int J Adv Manuf Technol 10, 263–268 (1995). https://doi.org/10.1007/BF01186877
Issue Date:
DOI: https://doi.org/10.1007/BF01186877