Summary
Continuum damage theory is used to model the failure behaviour of brittle materials. In the constitutive equations a damage parameter is incorporated. A damage criterion is postulated such that large differences between tension and compression strength can be described. A damage growth law is quantified based on experimental data for concrete. For the elaboration of the mathematical formulation the finite element method is applied. Numerical results obtained for a plane strain example show the merits of the procedure.
Similar content being viewed by others
References
Kachanov, L. M.: Time of the rupture process under creep conditions. Tzv. Akad. Nauk. SSR. Otd. Tekh.8, 26–31 (1958).
Becker, W., Gross, D.: A one-dimensional micromechanical model of elastic-microplastic damage evolution. Acta Mech.70, 221–233 (1987).
Malvern, L. E.: Introduction to the mechanics of a continuous medium. Englewood Cliffs: Prentice-Hall 1969.
Müller, I.: Thermodynamics. London: Pitman 1984.
Germain, P., Nguyen, Q. S., Suquet, P.: Continuum thermodynamics. J. Appl. Mech.50, 1010–1020 (1983).
Kestin, J., Bataille, J.: Irreversible thermodynamics of continua and internal variables. Continuum models of discrete systems. J. W. Provan, University of Waterloo Press 1978.
Chaboche, J. L.: Continuum damage mechanics. Parts 1 and 2. J. Appl. Mech.55, 59–72 (1988).
Billardon, R., Moret-Bailly, L.: Fully coupled strain and damage finite element analysis of ductile fracture. Nucl. Engng. Design105, 43–49 (1987).
Lemaitre, J.: Local approach of fracture. Engng. Fract. Mech.25, 523–537 (1986).
Kachanov, L. M.: Introduction to continuum damage mechanics. Dordrecht: Martinus Nijhoff 1986.
Simo, J. C., Ju, J. W.: Strain- and stress-based continuum damage models. Parts 1 and 2. Int. J. Solids Struct.23, 821–869 (1987).
Lai, W. H., Rubin, D., Krempl, E.: Introduction to continuum mechanics. Pergamon Press 1979.
Krajcinovic, D., Fonseka, G. U.: The continuous damage theory of brittle materials. Part 1. General theory. J. Appl. Mech.48, 809–815 (1981).
Lemaitre, J., Chaboche, J. L.: Mécanique des matériaux solides. Paris: Dunod, Bordas 1988.
Fonseka, G. U., Krajcinovic, D.: The continuous damage theory of brittle materials. Part 2. Uniaxial and plane response modes. J. Appl. Mech.48, 816–824 (1981).
Vonk, R. A., Rutten, H. S., van Mier, J. G. M., Fijneman, H. J.: Micromechanical simulation of concrete softening. Proc. Fracture Processes in Brittle Disordered Materials, Noordwijk, The Netherlands, preprint (1991).
Wang, P. T.: Complete stress-strain curve of concrete and its effect on ductility of reinforced concrete members. Ph. D. Thesis, University of Illinois at Chicago Circle 1977.
Paas, M. H. J. W.: Continuum damage mechanics with an application to fatigue. Ph. D. Thesis, Eindhoven University of Technology, The Netherlands 1990.
Mazars, J.: Probabilistic aspects of mechanical damage in concrete structures. Proc. Int. Conf. on Fracture Mechanics Technology applied to Material Evaluation and Structural Design, Melbourne, Australia, pp. 657–666 (1982).
Francois, D.: Fracture and damage. In: Elastic-plastic fracture mechanics (Larsson, L. H., ed.), pp. 285–302. Dordrecht: D. Reidel Publishing Company 1985.
Bathe, K. J.: Finite element procedures in engineering analysis. Englewood Cliffs: Prentice-Hall 1982.
Fotiu, P.: Die dynamische Wirkung dissipativer Prozesse in Materialien mit Mikrodefekten mit Anwendungen auf Schwingungsprobleme inelastischer Plattentragwerke. Dissertation, TU Wien 1990.
Bazant, Z. P., Pijaudier-Cabot, G.: Nonlocal continuum damage, localization instability and convergence. J. Appl. Mech.55, 287–293 (1988).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Brekelmans, W.A.M., Schreurs, P.J.G. & de Vree, J.H.P. Continuum damage mechanics for softening of brittle materials. Acta Mechanica 93, 133–143 (1992). https://doi.org/10.1007/BF01182579
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01182579