Summary
This paper deals with the three-dimensional analysis of the stress distribution in a plate of finite thickness containing an embedded elliptical crack subjected to a constant pressure. By using the douboe Fourier transform, the problem is reduced to the solution of the integro-differential equation which is solved iteratively. A numerical solution of the integro-differential equation is also obtained. These solutions are compared with the results in the published accounts.
Similar content being viewed by others
References
Lee, D.-S.: Stress around an elliptical crack in an elastic plate. Q. J. Mech. Appl. Math.46, 487–500 (1993).
Shah, R. C., Kobayashi, A. S.: Elliptical crack in a finite-thickness plate subjected to tensile and bending loading. J. Pressure Vessel Techn., 47–54 (1974).
Isida, M., Noguchi, H.: Tension of a plate containing an embedded crack. Eng. Fracture Mech.20, 387–408 (1984).
Nishioka, T., Atluri, S. N.: Analytical solution for embedded elliptical cracks, and finite element alternating method for elliptical surface cracks subjected to arbitrary loadings. Eng. Frac. Mech.17, 247–268 (1983).
Kuo, A.-K., Shvarts, S., Stonesifter, R. B.: An analytical solution for an elliptical crack in a flat plate subjected to arbitrary loading. ASTM STP2, 347–367 (1992).
Green, A. E., Zerna, W.: Theoretical elasticity, p. 166, London: Oxford Univ. Press 1954.
Erdélyi, A., Magnus, W., Oberhettinger, F., Tricomi, F. G.: Tables of integral transforms, vol. 1, p. 11. New York: McGraw-Hill 1954.
Watson, G. N.: Treatise on the theory of Bessel functions. Cambridge: Cambridge Univ. Press 1966.
Lur'e, A. I.: Three-dimensional problems of the theory of elasticity. New York: Interscience 1964.
Whittaker, E. T., Watson, G. N.: Modern analysis. Cambridge: Cambridge Univ. Press 1973.
Eshelby, J. D.: The elastic field outside an ellipsoidal inclusion. Proc. R. Soc. London Ser. A.252, 561–569 (1959).
Byrd, P. F., Friedman, M. D.: Handbook of elliptic integrals, 2nd ed. Berlin: Springer, 1971.
Kassir, M. K., Sih, G. S.: Three-dimensional stress distribution around an elliptical crack under arbitrary loadings. J. Appl. Mech.33, 601–611 (1966).
Irwin, G. R.: Crack-extension force for a part-through crack in a plate. J. Appl. Mech.84, 651–654 (1962).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lee, D.S. Stress intensity factors for an embedded elliptical crack in a plate of finite thickness. Acta Mechanica 120, 127–140 (1997). https://doi.org/10.1007/BF01174320
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01174320