Conclusion
The formation of coatings with hypoeutectic and eutectic structures on carbon and alloy steels is possible with a change in composition and thickness of the powder mixture, the temperature-time conditions of the process, and the cooling rate and of coatings with a hypereutectic structure only with a change in the concentration of the components of the mixture.
Similar content being viewed by others
Literature cited
V. I. Pokhmurskii, V. B. Dalisov, and V. M. Golubets, Increasing the Life of Machine Parts with the Use of Diffusion Coatings [in Russian], Naukova Dumka, Kiev (1980).
V. M. Golubets, O. L. Zaionts, and V. V. Kozub, "A new method of increasing the life of geological exploration tool joints, Fiz.-Khim. Mekh. Mater., No. 1, 103–104 (1980).
Ya. V. Shuiko, V. M. Golubets, M. I. Pashechko, et al., "The effectiveness of use of surface alloying of a steel casting for increasing the service life of the sprockets of type SP/Ya mine conveyors," Fiz.-Khim. Mekh. Mater., No. 4, 118–119 (1983).
Inventor's Cert. No. 1062305 IPC 23C 9/04. A Composition of Coating for Composite Impregmation of Steel Parts [in Russian].
V. M. Golubets and M. I. Pashechko "Principles of the creation and features of the formation of eutectic coatings from the liquid phase,", Fiz.-Khim. Mekh. Mater., No. 6, 25–29 (1984).
L. S. Lyakhovich and L. G. Voroshnin, Boronizing of Steels [in Russian], Metallurgiya, Moscow (1967).
I. S. Koifman, T. V. Egorshina, and G. V. Laskova, "X-ray diffraction analysis of borocementite," Metalloved. Term. Obrab. Met., No. 2, 59–60 (1969).
V. I. Andryushechkin and A. Yu. Bashnin, "Boronizing of 38KhNM steel with the use of high-frequency induction heating," Metalloved. Term. Obrab. Met., No. 4, 23–24 (1981).
N. E. Yanenskii, A. G. Vinnitskii, and L. F. Kolesnichenko, "Obtaining eutectic-type coatings by diffusion metallization in powders," in: Protective Coatings in Metals [in Russian], No. 10, Naukova Dumka, Kiev (1976), pp. 78–80.
Additional information
Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR, Lvov. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 55–58, July, 1987.
Rights and permissions
About this article
Cite this article
Golubets, V.M., Pashechko, M.I. Determination of the structural morphology of eutectic coatings from technological factors. Met Sci Heat Treat 29, 541–546 (1987). https://doi.org/10.1007/BF01167744
Issue Date:
DOI: https://doi.org/10.1007/BF01167744