References
I. P. Bardin, Use of Oxygen in Converter Steel Making, (Primenenie Kisloroda v Konvert. Proizv. Stali) Metallurgizdat Press, 1959.
Trudy TsNIIChM, (Proceedings of Iron and Steel Research Inst.) 1956, No. 13.
S. G. Afanas'ev et al.,Kislorod, 1957, No. 4.
P. Ya. Ryzhkov et al.,Stal', vol. 18, 1958, No. 7, 643–7.
L. D. Kovesh,Energomashinostroenie, 1959, No. 10.
A. P. Gulyaev et al.,Stal', vol. 20, 1960, No. 8, 740–46, [Stal in English, 602-6].
A. A. Mitrofanov, Byulleten' TsIIN (Bulletin Central Info. Inst.) 1958, No. 17.
V. N. Geliveri, Byulleten' TsIIN (Bulletin Central Info. Inst.) 1958, No. 10.
N. I. Goncharenko, Byulleten' TsIIN (Bulletin Central Info. Inst.) 1956, No. 24.
S. D. Brik, Byulleten' TsIIN (Bulletin Central Info. Inst.) 1958, No. 13.
Additional information
Central Iron and Steel Research Institute
(Russian) Editor's Note: The manufacture of steel by blowing with oxygen in a converter[L.D.furnace] is an advanced method which assumes increasing industrial importance. The product is not inferior to an equivalent O.H. steel in any respect but shows an improved ductility. The conclusions of Mitrofanov's paper are based on a large number of heats and are therefore well-documented.
More detailed data on the properties of the new steels can be found in the references cited although there was not sufficient work done on this subject, especially on killed (including alloy) steels.
Rights and permissions
About this article
Cite this article
Mitrofanov, A.A. Basic oxygen steel. Met Sci Heat Treat 2, 657–660 (1960). https://doi.org/10.1007/BF01166746
Issue Date:
DOI: https://doi.org/10.1007/BF01166746