Abstract
Experimental data on dectmphmetic precipitation of ceramic slips (for porcelain, faience, and household ceramics) onto an aluminum electrode under apulse-periodic current with different parameters (frequency. voltage, time) me presented, Advantages ofdoctrophnrmic technology with dbe use ofupulse-periodic current with u low-frequency spectrum are described. Tbc body grows 25 times faster than in gypsum molds, the density of the precipitate and the strength of the dried and fired specimens increase. and the total consumption of power is reduced. The intensification of the technological process is explained by electromagnetic activation of the working medium and the shaped mixture by the longwave spectrum.
Similar content being viewed by others
References
W. Ryan, E. Massoud, and C. T. S. B. Perera, “Fabrication by electrophoresis,”Br. Ceram. Soc., 8(2), 46 (1981).
V E. Myasoedov,A Frequency-Pulse Method of Electroprecipitation of Silicate Coatings [in Russian], Ivanovo (1991).
S. Ya. Grilikhes and K. I. Tikhonov,Electrolytic and Chemical Coatings [in Russian], Khimiya. Leningrad (1990).
A. N. Ozerov, A. K. Krivtsov, V. A. Khamaev, et al.,Nonstationaty Electrolysis [in Russian], Volgograd (1972).
Ya. I. Frenkel',Kinetic Theory of Liquids [in Russian]. Nauka. Leningrad (1975).
V. E. Myasoedov, G. P. Kozlovskaya, and E. B. Kharitonov, “Effect of diluents on the properties of silicate primer enamel slips in the process of electroprecipitation,” kv.Izv Vuzov, Ser Khim. Khim. Tekhnol., 35(6), 60–66 (1992).
Author information
Authors and Affiliations
Additional information
Translated from Steklo i Keramika, No. 5, pp. 13–15, 1996.
Rights and permissions
About this article
Cite this article
Krivtsov, A.K., Myasoedov, V.E., Kharitonov, E.B. et al. Electrophoretic deposition of ceramic slips under a pulse-periodic current. Glass Ceram 53, 140–142 (1996). https://doi.org/10.1007/BF01166434
Issue Date:
DOI: https://doi.org/10.1007/BF01166434