Abstract
A detailed finite element analysis has been carried out to simulate the fibre pull-out test. The fibre-matrix interface was assumed to obey a Coulomb friction law. Special attention was focused on the effect of residual thermal stresses. An approximate analytical solution, rather similar to those in the literature, was derived. The results of the finite element analysis have been used to investigate the limitation and the validity of this analytical solution. The accuracy of various approximate analyses has also been discussed.
Similar content being viewed by others
References
J. Aveston, G. A. Cooper andA. Kelly, in “The Properties of Fibre Composites”, Conference Proceedings, National Physical Laboratory, Guildford (IPC Science and Technology Press, Teddington, 1971) 15.
W. A. Fraser, F. H. Ancker, A. T. Dibenedetto andB. Elbirli,Polym. Compos. 4 (1983) 238.
A. N. Netravali, R. B. Henstenburg, S. L. Phoenix andP. Schwartz,ibid. 10 (1989) 226.
D. B. Marshall,J. Am. Ceram. Soc. 67 (1984) C-259.
D. K. Shetty,ibid. 71 (1988) C-107.
A. Dollar, P. S. Steif, Y. C. Wang andC. Y. Hui,Int. J. Solids Struct. 30 (1993) 1313.
C. Liang andJ. W. Hutchinson,Mech. Mater. 14 (1993) 207.
L. J. Broutman, in “Interfaces in Composites” ASTM STP 452, edited by M. L. Salkind (American Society for Testing and Materials, Philadelphia, PA, 1969) p. 27.
J.-P. Favre andM. C. Merienne,Int. J. Adhes. Adhes. 1 (1981) 311.
D. B. Eagles, B. F. Blumentritt andS. L. Cooper,J. Appl. Polym. Sci. 20 (1976) 435.
L. S. Penn andS. M. Lee,J. Compos. Technol. Res. 11 (1989) 23.
G. Desarmot andJ.-P. Favre,Compos. Sci. Technol. 42 (1991) 151.
H. L. Cox,Br. J. Appl. Phys. 3 (1952) 72.
J. Aveston andA. Kelly,J. Mater. Sci. 8 (1973) 352.
L. N. McCartney,Proc. R. Soc. Lond. A425 (1987) 215.
B. Budiansky, J. W. Hutchinson andA. G. Evans,J. Mech. Phys. Solids 34 (1986) 167.
L. B. Greszczuk, in “Interfaces in Composites”, ASTM STP 452 (American Society for Testing and Materials, Philadelphia, PA, 1969) p. 42.
P. Lawrence,J. Mater. Sci. 7 (1972) 1.
A. Takaku andR. G. C. Arridge,J. Phys. D Appl. Phys. 6 (1973) 2038.
P. Bartos,J. Mater. Sci. 15 (1980) 3122.
R. J. Gray,ibid. 19 (1984) 861.
P. S. Chua andM. R. Piggott,Compos. Sci. Technol. 22 (1985) 33.
A. V. Sarma, P. N. Murthy andP. S. Kushwaha,Fiber Sci. Technol. 12 (1979) 129.
P. Steif andS. F. Hoysan,Mech. Mater. 5 (1986) 375.
L. S. Sigl andA. G. Evans,ibid. 8 (1989) 1.
Y. C. Gao, Y.-W. Mai andB. Cotterell,J. Appl. Math and Phys. (ZAMP) 39 (1988) 550.
J. W. Hutchinson andH. M. Jensen,Mech. Mater. 9 (1990) 139.
D. B. Marshall,Acta Metall. Mater. 40 (1992) 427.
R. J. Kerans andT. A. Parthasarathy,J. Am. Ceram. Soc. 74 (1991) 1585.
Z.-F. Li andD. T. Grubb,J. Mater. Sci. 29 (1994) 189.
M. Uemura, H. Iyama andY. Yamaguchi,J. Thermal Stresses 2 (1979) 393.
G. Meda, S. F. Hoysan andP. Steif,J. Appl. Mech. 60 (1993) 986.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zucchini, A., Hui, C.Y. Detailed analysis of the fibre pull-out test. J Mater Sci 31, 5631–5641 (1996). https://doi.org/10.1007/BF01160808
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01160808