Literature cited
L. S. Bryukhanova, V. M. Miroshnichenko, Z. M. Polukarova, and E. D. Shchukin, “Study of optimum conconditions for using molten metals during cutting solids. Effect of cutting schedule on the efficiency of molten metals,” Fiz.-Khim. Mekh. Mater., No. 4, 49–53 (1978).
V. I. Likhtman, E. D. Shchukin, and P. A. Rebinder, Physicochemical Mechanics of Metals [in Russian], Izd. Akad. Nauk SSSR, Moscow (1962).
Z. M. Polukarova, A. G. Skvortsov, L. S. Bryukhanova, and E. D. Shchukin, “Effect of loading type on the degree of absorption reduction in strength and ductility of metals,” Fiz.-Khim. Mekh. Mater., No. 2, 23–27 (1975).
E. D. Shchukin, Z. M. Polukarova, L. S. Bryukhanova, V. S. Yushchenko, and P. A. Rebinder, “Alleviation of drilling in the presence of molten metals,” Dokl. Akad. Nauk SSSR,205, No. 1, 86–89 (1972).
E. D. Shchukin, L. S. Bryukhanova, Z. M. Polukarova, and N. V. Pertsov, “Use of strong surface-active media for activating mechanical treatment of solids and materials,” Fiz.-Khim. Mekh. Mater., No. 4, 40–51 (1976).
Y. N. Tal'nov, A. N. Reznikov, and G. G. Yashin, “Increase in cutting efficiency by using surface-active metals as a lubricant,” Vestn. Mashinostr., No. 1, 75–76 (1975).
E. D. Shchukin, G. G. Yashin, Yu. N. Tal'nov, V. M. Kachkaev, Z. M. Polukarova, and L. S. Bryukhanova, “Drilling of some difficultly machinable materials in the presence of tin-zinc eutectic,” Fiz.-Khim. Mekh. Mater., No. 3, 90–95 (1973).
N. P. Fedot'ev, A. F. Alabyshev, A. L. Rotinyan, and P. M. Vyacheslavov, Applied Electrochemistry [in Russian], Khimiya, Leningrad (1967).
Z. M. Polukarova, L. S. Uspenskaya, A. I. Maksimov, L. S. Bryukhanova, E. D. Shchukin, V. M. Zanozin, and Z. V. Nikitina, “Physicochemical properties of steel 1Kh18N9T after drilling in metallic melts,” Fiz.-Khim. Mekh. Mater., No. 1, 50–54 (1978).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 14, No. 6, pp. 14–18, November–December, 1978.
Rights and permissions
About this article
Cite this article
Bryukhanova, L.S., Miroshnichenko, V.M., Polukarova, Z.M. et al. Optimum conditions for using molten metals in cutting solids. Effect of molten-metal chemical composition and cutting-tool material on drilling of steel 45. Mater Sci 14, 589–592 (1978). https://doi.org/10.1007/BF01159989
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01159989