Abstract
Composite materials of steel sheets joined by interlayers of zinc or lead- tin, show very good impact and corrosion resistance properties. Resistance spot-weld characteristics of these composite materials made of steel sheets and non-ferrous metals have been tested. Spot welds of composites with both zinc and lead- tin interlayers present good behaviour in peeling tests. Shear tests of the welds also show very high strength, probably as a consequence of simultaneous brazing because of the alloyed layer of non-ferrous material around the weld spot. This good welding behaviour enhances the possibilities of application of this composite.
Similar content being viewed by others
References
J. D. Embury, N. J. Petch, A. E. Wraith andE. S. Wright,Trans. TMS AIME 239 (1967) 149.
T. P. Stuart andI. G. Crouch,Int. J. Adhes.,12 (1992) 3.
H. W. Kum, T. Qyamal, J. Wadsworth andO. Sherby,J. Mech. Phys. Solids 31 (1983) 173.
B. C. Snyder, J. Wadsworth andO. Sherby,Acta Metall. 32 (1984) 919.
S. Lee, J. Wadsworth andO. Sherby,J. Compos. Mater. 25 (1991) 842.
Y. Ohashi, J. Wolfenstine, R. Kock andO. Sherby,Mater. Sci. Eng. A151 (1992) 37.
A. J. Vázquez-Vaamonde andJ. J. De Damborenea,Proc. Adv. Mater. 1 (1991) 55.
Idem., Mater. Des. 14 (1993) 197.
A. J. Vázquez-Vaamonde,J. Phys. IV Supl. 3 (1992) 773.
Idem, Final Report ESCC 7210-MB/931-90-F4.02A, 1991–1993, Development of New Multilayer Materials of Steel and Non-ferrous Matrix, D.G. XII, Brussels.
Recommended Practice for Automotive Weld Quality-Resistance Spot Welding, ANSI/AWS D8.7–88 (American Welding Society, Miami, 1988).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Engstroen, H., Durán, J., Amo, J.M. et al. Spot welding of metal laminated composites. J Mater Sci 31, 5443–5449 (1996). https://doi.org/10.1007/BF01159315
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01159315