Preparation of Pb(Zr_0.52Ti484848)O₃ thin films on silicon-on-insulator substrates by excimer laser deposition combined with rapid thermal annealing

Abstract

In this paper we report the fabrication of ferroelectric Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films on Si-on-Insulator (SOI) substrates with and without an electrode by pulsed excimer laser deposition combined with rapid thermal annealing. Based on the structural and interfacial characteristics analysis by X-ray diffraction (XRD), Rutherford backscattering spectroscopy (RBS), cross-sectional transmission electron microscopy (XTEM) and automatic spreading resistance measurement (ASR), the film structure and orientation were revealed to be dependent on the annealing time and annealing temperature as well as deposition temperature. From RBS spectra and XTEM observation it is shown that the PZT thin films did not interact with the top silicon layers of SOI and that the composition of the film was similar to the target. The ASR measurements showed that the electrical properties of PZT/SOI as well as PZT/Pt/SOI were abrupt, and that the electrical properties of the SOI substrates were still good after the PZT growth.