Conclusions
-
1.
A high-efficiency compressed air nozzle has been designed for the hot-blast atomization of molten low-melting-point metals.
-
2.
An improved process has been developed for the manufacture of atomized tin and tinbase solder powders at the Ryaztsvetment Factory. The higher tin powder grades Types POÉ and POV, to GOST 9723-73 standard, are now being produced at the factory.
Similar content being viewed by others
Literature cited
Yu. I. Naida, Poroshkovaya Met., No. 3 (1971).
Yu. I. Naida and O. S. Nichiporenko, Poroshkovaya Met., No. 8 (1972).
Yu. I. Naida et al., Poroshkovaya Met., No. 5 (1973).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 11(155), pp. 94–97, November, 1975.
Rights and permissions
About this article
Cite this article
Naida, Y.I., Nichiporenko, O.S., Shashmurin, V.A. et al. Improvements in the manufacture of tin powders at the Ryaztsvetmet factory. Powder Metall Met Ceram 14, 942–944 (1975). https://doi.org/10.1007/BF01158169
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01158169