Abstract
A high-temperature alloy with a coating is a composite material and therefore the optimum treatment of its surface layers and the core can differ substantially. This paper is devoted to problems of choosing optimum regimes of heat treatment for different high-temperature alloys with coatings as applied to the production of blades.
Similar content being viewed by others
References
C. Sims and V. Hagel,High-Temperature Alloys [Russian translation], Metallurgiya, Moscow (1976).
USA Patent No. 4253884.
USA Patent No. 4253885.
B. I. Yunts, A. I. Maksimov, A. A. Astaf iev, and M. A. Maksimova, “Protective diffusion coatings of blades of high-temperature gas-turbine installations,”Énergomashinostroenie, No. 12, 32–34 (1980).
E. N. Masaleva and A. I. Rybnikov, “Effect of the structural state of castable high-temperature alloys on their capacity for brittle fracture,”Trudy TsKTI, No. 169, 95–101 (1976).
A. M. Klypina, M. M. Malamed, L. D. Chistyakova, and A. E. Levin, “High-temperature strength, of alloy ZhS6K with a chromium-base heat-resistant coating,”Énergomashinostroenie, No. 5, 35–37 (1985).
B. A. Movchan, I. S. Malashenko, and V. I. Nikitin, “Effect of Co-Cr-Al-Y coatings on the physicomechanical properties of alloy E1893 of working blades of the turbine of a GT 100 installation,”Probl. Spets. Élektrometallurg., No, 1, 34–41 (1985).
V. B. Brik, Diffusion and Phase Transformations in Metals and Alloys [in Russian], Naukova Dumka, Kiev (1985).
G. N. Tretyachenko, A. P. Voloshchenko, and L. B. Getsov, “Thermal stability of blades with protective coatings in a corrosive medium,” Probl. Prochnosti, No. 1, 61–65 (1983).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 21–25, September, 1995.
Rights and permissions
About this article
Cite this article
Rybnikovi, A.I., Getsov, L.B. Heat treatment of blades with coatings. Met Sci Heat Treat 37, 368–372 (1995). https://doi.org/10.1007/BF01156812
Issue Date:
DOI: https://doi.org/10.1007/BF01156812