Abstract
One of the requirements imposed on high-temperature nickel alloys for long-term operation under high temperatures and stresses is structural stability, which ensures constant properties during operation of parts. It is known that the main strengthening phase of nickel alloys is a γ′-phase of the type (Ni, Cr)3(Al, N) or (Ni, Cr)3(Al, Ti, Nb), which may amount to 50% in deformable nickel alloys. In addition, these alloys contain a certain amount of carbides, borides, and carbonitrides (up to 3 wt. %). An increase in the content of alloying elements in high-temperature alloys may cause formation of undesirable TCP-phases in their structure. For example, at high contents of molybdenum and tungsten a thin lamellar p-phase (Ni, Co, Fe)7(Mo, W)6 is segregated. The authors investigated the effect of the μ-phase on the set of chemical properties of industrial alloy KhN60KVYuMB (pressed rods 105 mm in diameter).
Similar content being viewed by others
References
C. Sims and V. Hagel,High-Temperature Alloys [Russian translation], Metallurgiya, Moscow (1976).
D. Cotsoradis, P. Felix, H. Fishmeister, et. al. (eds.),High-Temperature Alloys for Gas Turbines. Proc. Int. Conf [Russian translation], Metallurgiya, Moscow (1981).
High-Temperature and Heat-Resistant Metallic Materials: Physicochemical Principles of Creation. Coll. Works [in Russian], Nauka, Moscow (1987).
M. A. Filatova, S. P. Barabanov, V. S. Sudakov, et al., “Hightemperature deformable alloys for working blades of gas-turbine installations: a review,” in:Technology, Economics, and Organization of Production and Management [in Russian], TsNIITÉITyazhmash, Moscow (1990), Ser. 8, Issue 4.
L. N. Zimina, “Rational alloying of high-temperature nickel alloys,”Prom. Teplotekh., 3(2), 92–97 (1981).
High-Temperature and Heat-Resistant Steels and Nickel-Base Alloys. Coll. Works [in Russian], Nauka, Moscow (1984).
Author information
Authors and Affiliations
Additional information
Translated from Metailovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 15–19, September, 1995.
Rights and permissions
About this article
Cite this article
Filatova, M.A., Sudakov, V.S. Efferct of the μ-phase on the properties of superhigh-temperature derofmable nickel alloy KhN60KVYuMB. Met Sci Heat Treat 37, 361–364 (1995). https://doi.org/10.1007/BF01156810
Issue Date:
DOI: https://doi.org/10.1007/BF01156810