This is a preview of subscription content, log in via an institution to check access.
Literature cited
T. Ya. Kosolapova, T. V. Andreeva, T. S. Bartnitskaya, et al., Nonmetallic Refractory Compounds [in Russian], Metallurgiya, Moscow (1985).
G. V. Sarasonov, L. Ya. Markovskii, A. F. Zhigach, and M. G. Valyashko, Boron, Its Compounds and Alloys [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1960).
G. W. Hollenberg, “Thermally induced stresses and fractures in boron carbide pellets,” Am. Ceram. Soc. Bull.,59, No. 5, 538–548 (1980).
R. W. Rice, “Strength and grain size effects in ceramics,” Proc. Brit. Ceram. Soc, No. 20, 205–257 (1972).
N. D. Rybal'chenko, A. G. Mironova, V. P. Podtykan, et al., “Effect of the hot pressing conditions of boron carbide on the structure and mechanical properties,” Poroshk, Metall., No. 8, 39–43 (1983).
Boron and Refractory Borides, Springer-Verlag, Berlin (1977).
G. de With, “High-temperature fracture of boron carbide: Experiments and simple theoretical models,” J. Mater. Sci.,19, No. 2, 457–466 (1984).
K. A. Schwetz and W. Grellner, “The influence of carbon on the microstructure and mechanical properties of sintered boron carbide,” J. Less Common Met.,82, 37–47 (1981).
G. A. Gogotsi, Ya. L. Grushevskii (Ya. L. Groushevsky), O. B. Dashevskaya, et al., “Complex investigation of hot-pressed boron carbide,” J. Less Common Met.,117, No. 1/2, 225–230 (1986).
G. A. Gogotsi, Strength of Engineering Nitride Ceramics [in Russian], Preprint of the Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev (1982).
G. A. Gogotsi, Yu. G. Gogotsi, Ya. L. Grushevskii, et al., “Complex investigation of hot-pressed boron carbide,” in: Proceedings of the 8th International Symposium on Boron, Borides, Carbides, Nitrides, and Related Compounds. Tbilisi, October 7–11, 1984, Metsniereba, Tbilisi (1984), pp. 43–44.
M. S. Koval'chenko, A. V. Laptev, and A. B. Zhidkov, “Effet of annealing on the structure and properties of hot-pressed cermets based on boron carbide,” Poroshk. Metall., No. 9, 51–54 (1985).
A. N. Pilyankevich, V. F. Britun, Yu. G. Tkachenko, and V. K. Yulyugin, “Structure of the surface layers of boron carbide after friction in the temperature range 20–1400°C,” Poroshk. Metall., No. 8, 93–97 (1986).
H. Hofman and G. Petsov, “Structure and properties of materials produced by interaction in hot pressing,” in: Proceedings of the 8th International Symposium on Boron, Borides, Carbides, Nitrides, and Related Compounds, Tbilisi, October 7–11, 1984, Metsniereba, Tibilisi (1984), pp. 40–41.
A. D. Osipov, I. T. Ostapenko, V. V. Slezov, et al., “Effect of porosity and grain size on the mechanical properties of hot-pressed boron carbide,” Poroshk. Metall., No. 1, 63–67 (1982).
M. Beauvy, “Mechanical properties of sintered boron carbide,” Rev. Int. Hautes Temp. Ref.,19, 301–310 (1982).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 7(295), pp. 84–90, July, 1987.
Rights and permissions
About this article
Cite this article
Gogotsi, G.A., Firstov, S.A., Vasil'ev, A.D. et al. Mechanical properties and special features of the structure of materials based on boron carbide. Powder Metall Met Ceram 26, 589–594 (1987). https://doi.org/10.1007/BF01156565
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01156565