Literature cited
I. M. Khanin, V. A. Mizin, A. F. Shevchenko, et al., “Entrainment of sprayed liquids in columns without packing,” in: Problems in Chemistry and Chemical Engineering [in Russian], No. 28, Izd. KhGU, Kharkov (1973), pp.168–173.
M. K. Baranaev and V. I. Tenyakov, “Drop sizes for a swirl nozzle when spraying liquids with a wide range of properties,” Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza, No. 3, 155–162 (1970).
B. V. Raushenbakh, S. A. Belyi, I. V. Bespalov, et al., Physical Operating Principles for Combustion Chambers of Jet Engines [in Russian], Mashinostroenie, Moscow (1964).
A. S. Lyshevskii, Atomization of Liquid Fuel Using Diesel Injectors [in Russian], Mashgiz, Moscow (1963).
I. G. Plit, I. N. Polyanchikov, and S. M. Ivanov, “Fineness of the spray from a power-driven screw nozzle,” Khim. Neft. Mashinostr., No.4, 15–18 (1965).
S. I. Golub, A. M. Rozen, M. B. Baisblat, et al., “Entrainment of liquid drops in a vertical gas stream,” Teor. Osn. Khim. Tekhnol.6, No.3, 484–490 (1972).
V. A. Pavlov and Ya. P. Storozhuk, “Simplification of the methods of estimating the fineness of atomized liquid fuel,” Teploénergetika, No.2, 28–32 (1966).
G. G. Abezgauz, A. P. Tron', Yu. N. Kopenkin, et al., Handbook of Stochastic Calculations [in Russian], Voenizdat, Moscow (1970).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No.10, pp. 19–20, October, 1978.
Rights and permissions
About this article
Cite this article
Zhitlo, A.G., Khanin, I.M. Calculation nomograms for determining the size of drops formed during the breakup of liquid. Chem Petrol Eng 14, 907–911 (1978). https://doi.org/10.1007/BF01155893
Issue Date:
DOI: https://doi.org/10.1007/BF01155893