Abstract
It is advantageous to fabricate metal matrix-particulate composites (MMPCs) using powder metallurgy (PM) because the fabricated composites possess a higher dislocation density, a small sub-grain size and limited segregation of particles, which, when combined, result in superior mechanical properties. The various PM-related processes currently in use in the fabrication of MMPCs, are reviewed, outlining the common problems encountered in each of these fabrication processes. The more recently developed PM techniques to fabricate MMPCs are also discussed.
Similar content being viewed by others
References
F. J. Clauss, “Solid Lubricants and Self-lubricating Solids” (Academic Press, New York, 1972).
K. C. Kerider, “Metallic Matrix Composites” (Academic Press, New York, 1974).
R. K. Rohatgi, R. Asthana andS. Das,Int. Met. Rev. 31 (1986) 115.
J. A. Cornie, H.-K. Moon andM. C. Flemings, in “Proceedings on Fabrication of Reinforced Metal Composites”, edited by J. Masounave and F. G. Hamel (ASM International Montreal, Canada, 1990).
H. J. Rack,Adv. Mater. Manuf. Process. 3 (1988) 327.
A. Ibrahim, F. A. Mohamed andE. J. Lavernia,J. Mater. Sci. 26 (1991) 1137.
P. K. Rohatgi, S. Ray andY. B. Liu,Int. Mater. Rev. 37 (1992) 129.
R. Mehrabian, in “Proceedings on High Temperature/ High Performance Composites”, edited by F. D. Lemkey, S. G. Fishman, A. G. Evans and J. R. Strife (MRS, Reno, NV, 1988) p. 3.
D. M. Schuster, M. D. Skibo andW. R. Hoover,Light Met. Age February (1989) 15.
A. L. Geiger andJ. A. Walker,J. Metals (JOM)8 (1991) 8.
J. Wadsworth, T. G. Nieh andJ. J. Stephens,Int. Met. Rev. 33 (1988) 131.
R. J. Arsenault andS. B. Wu,Scripta Metall. 22 (1988) 767.
W. H. Hunt Jr,C. R. Cook, K. P. Armanie andT. B. Garganus, in “Proceedings on Powder Metallurgy Composites”, edited by P. K. Kumar, A. Ritter and K. Vedula (TMS, Warrendale, PA, 1988).
W. H. Hunt Jr,O. Richmond andR. D. Young, in “Proceedings on 6th International Conference on Composite Materials”, edited by F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson and J. Morton (Elsevier Applied Science, London, 1987) p. 2.209.
V. V. Bhanuprasad, R. B. V. Bhat, A. K. Kuruvilla, K. S. Prasad, A. B. Pandey andY. R. Mahajan,Int. J. Powder Metall. 27 (1991) 227.
A. D. Rosato, T. Vreeland, Jr, andF. B. Prinz,Int. Mater. Rev. 36 (1991) 45.
A. D. Rosato, F. Prinz, K. Strandburg andR. Swendsen,Powder Technol. 49 (1986) 59.
J. S. Benjamin, in “Proceedings on New Materials by Mechanical Alloying Techniques”, edited by E. Arzt and L. Schultz (Calw-Hirsau, FRG, 1988) p. 3.
J. S. Benjamin andT. E. Volin,Metall. Trans. 5 (1974) 1929.
K. Matsuura andM. Matsuda, in “Proceedings on Science and Technology of Sintering”, Vol. 1 (Tokyo, Japan, 1987) p. 629.
D. L. Davidson,Metall. Trans. 18A (1987) 2115.
A. Sharma, P. R. Soni andT. V. Rajan, in “Proceedings on Horizons of Powder Metallurgy Part II” (Dusseldof, FRG, 1986) p. 1285.
D. R. Maurice andT. H. Courtney,Metall. Trans. 21A (1990) 289.
P. S. Gilman andJ. S. Benjamin,Ann. Rev. Mater. Sci. 13 (1983) 279.
G. Jangg, in “Proceedings on New Materials by Mechanical Alloying Techniques” (Calw-Hirsau, FRG, 1988) p. 39.
R. Sundaresan andF. H. Froes, in “Proceedings on New Materials by Mechanical Alloying Techniques” (Calw-Hirsau, FRG, 1988) p. 243.
Y. B. Liu, J. K. M. Kwok, S. C. Lim, L. Lu andM. O. Lai, in “ASIA Pacific Conference on Materials Processing”, Singapore, 23–25 February, 1993.
L. Lu, M. O. Lai, J. K. M. Kwok, Y. B. Liu andS. C. Lim,ibid..
W. G. J. Bunk,Mater. Sci. Eng. 134A (1991) 1087.
W. R. Mohn, “Manufacturing Technology Development of Extrusion Billet Stock”, Final Report NSWC contract N60921-83-C-0120 (1985).
P. H. Bowen andW. H. Hickam,Machine Design (7) (1963) 119.
A. Asari, T. Fujikawa, T. Ishii andS. Kofune, in “Proceedings on Sintering’ 87”, Vol. II (Tokyo, Japan, 1987) p. 761.
P. Niskanen andW. R. Mohn,Metals Progr. 3 (1988) 39.
C. F. Lewis,ME (3) (1986) 42.
H. F. Lee, F. Boey, K. A. Khor, M. J. Tan, J. Gan andN. L. Loh,J. Mater. Process. Technol. 29 (1992) 245.
F. Delannay, L. Froyen andA. Deruyttere,J. Mater. Sci. 22 (1987) 1
R. Riedel, J. Kunesch, G. Passing, W. Kaysser andG. Petzow, in “Proceedings on Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behavior”, TMS Annual Meeting, Anaheim, CA, USA (1990) p. 579.
M. A. Sargent, C. Rensen andW. H. M. Alsem,ibid., p. 137.
Z. Zhou, Y. K. Xu, W. D. Wei andZ. Q. Hu,Mater. Sci. Technol. 7 (1991) 592.
K. C. Owen, M. J. Wang, C. Persad andZ. Eliezer,Wear 120 (1987) 117.
C. Persad, S. Raghaathan, B. H. Lee, D. L. Bourell, Z. Eliezer andH. L. Marcus,Mater. Res. Soc. Symp. Proc. 120 (1988) 23.
C. Persad, Z. Eliezer, D. L. Bourell andH. L. Marcus, in “Proceedings on Composites—Design, Manufacture and Application”, edited by S. W. Tsai and G. S. Springer (ICCM/8, Honolulu, Hawaii, USA (1991) p. 17–A-1.
Y. W. Kim, D. L. Bourell andC. Persad,Mater. Sci. Eng. A123 (1990) 99.
S. Raghunathan,ibid. A131 (1991) 243.
K. Akechi andZ. Hara,Trans. Jpn. Inst. Metals 20 (1979) 51.
S. J. Hong andP. W. Kao,Mater. Sci. Eng. A119 (1989) 153.
R. N. Wright, G. E. Korth andJ. E. Flinn,Adv. Mater. Process. (10) (1987) 56.
E. Y. Gutmanas, in “Proceedings on New Materials by Mechanical Alloying Techniques”, edited by E. Artz and L. Schultz (Calw-Hirsau, FRG, 1988) p. 129.
Idem, Scripta Metall. 13 (1979) 11.
P. D. Prichard, R. L. McCormick, Z. Z. Mutasim andR. W. Smith, in “Proceedings on Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behaviour”, edited by R. B. Bhagat, A. H. Clauer, P. K. Kumar and A. M. Ritter, TMS Annual Meeting Anaheim, CA, USA (1990) p. 561.
M. R. Jackson, P. A. Siemers, J. R. Rairden, R. L. Mehan andA. M. Ritter, in “Proceedings on Processing and Properties for Powder Metallurgy Composites” (TSM/AIME, Denver, CO, 1987) p. 45.
A. M. Ritter, M. R. Jackson andR. N. Wright,ibid.in “, p. 59.
M. Hasegawa andK. Takeshita,Metall. Trans. 9B (1978) 383.
T. C. Willis,Metals Mater. 4 (1988) 485.
Y. Wu andE. J. Lavernia,J. Metals (JOM) (8) (1991) 16.
M. Gupta, F. A. Mohamed andE. J. Lavernia, in “Proceedings on Advances in Processing and Characterization of Ceramic and Metal Matrix Composites”, edited by H. Mostaghaci, Halifax, Canada (1989) p. 236.
Idem, in “Proceedings on Metal and Ceramic Composites: Processing, Modelling and Mechanical Behaviour”, edited by R. B. Bhagat, A. H. Clauer, P. K. Kumar and A. M. Ritter, TMS Annual Meeting, Anaheim, CA (1990) p. 91.
T. Chanda, W. E. Frazier, F. A. Mohamed andE. J. Lavernia,ibid., p. 47.
J. M. Sater, S. C. Iha andT. H. Sanders, in “Proceedings on Aluminum Alloys”, edited by A. K. Vasudevan and R. D. Doherty (1989) p. 410.
S. Krishnamurthy, Y.-W. Kim, G. Das andF. H. Fores, in “Proceedings on Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behaviour”, edited by R. B. Bhagat, A. H. Clauer, P. K. Kumar and A. M. Ritter, TMS Annual Meeting, Anaheim, CA (1990) p. 145.
P. Niskanen andW. R. Mohn,Adv. Mater. Process. (3) (1988) 39.
F. H. Froes, Y.-W. Kim, S. Krishnamurthy andR. Sundaresan, in “Current Status of PM Technology of Light Metals”, edited by I. Jenkins, M. B. Waldron and J. V. Wood (The Institute of Metals, London, 1990).
K. A. Khor,J. Mater. Proc. Technol. 29 (1992) 267.
J. Dunkley,Met. Mater. 6 (1990) 361.
H. Morimoto, H. Iwamura andK. Jyono, in “Proceedings on Composites — Design, Manufacture and Application”, ted by S. W. Tsai and G. S. Springer (ICCM/8), Honolulu, Hawaii, (1991) p. 17–L-1.
H. J. Rack andG. Piper,ibid., p. 17-C-1.
P. R. Roberts andB. L. Ferguson,Int. Mater. Rev. 36 (1991) 62.
W. E. Frazier, G. J. Lodon andA. R. Austen, in “Proceedings on Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behavior”, edited by R. B. Bhagat, A. H. Clauer, P. K. Kumar and A. M. Ritter, TMS Annual Meeting, Anaheim, CA (1990) p. 597.
D. L. Erich,Int. J. Powder Metall. 23 (1987) 45.
P. D. Funkenbusch andT. H. Courtney,Acta Metall. 33 (1985) 913.
A. Mortensen, in “Proceedings on Fabrication of Particulates Reinforced Metal Composites”, edited by J. Masounave and F. G. Hamel (ASM International, Montreal, 1990) p. 217.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Liu, Y.B., Lim, S.C., Lu, L. et al. Recent development in the fabrication of metal matrix-particulate composites using powder metallurgy techniques. J Mater Sci 29, 1999–2007 (1994). https://doi.org/10.1007/BF01154673
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01154673