Abstract
The critical coefficient of stress intensity in linear fracture mechanics and an analytical expression for evaluating it have been established for the conditions of absolutely brittle fracture in a continuous isotropic medium. At the same time, the resource of plasticity in actual discrete (crystalline) materials is often determined using the concept of fracture toughness (crack resistance) calculated by the same equation as that used for evaluating the critical stress intensity. The article concerns the causes and consequences of this phenomenon.
Similar content being viewed by others
References
G. R. Irwin, “Plastic zone near a crack and fracture toughness,”Proc. 7th Sagamore Conf (1960).
H. Neuber,Kerbspannunslehre Springer, Berlin (1937), p. 142.
E. Orowan, Z.Kristallographie,89, 327–343 (1934).
A. P. Gulyaev, “Brittle fracture strength,”Metalloved. Term. Obrab. Met., No. 2, 21–26 (1992).
L. S. Kremnev, “Special features of fracture of tool materials,”Metalloved Term. Obrab. Met., No. 4,17–22 (1994).
V. V. Parton,Fracture Mechanics [in Russian], Nauka, Moscow (1990).
S. Marphy and J. A. Whiteman, “Kinetics of M2C precipitation in tempered martensite,”Met. Sci. J.,4, 58–62 (1970).
Tables of Standard Reference Data. High-Speed Tool Steel. Mechanical Properties. GSSSD 9 - 79 [in Russian], Izd. Standartov (1980), p. 7.
A. P. Andrievskii and I. I. Spivak,Strength of Refractory Compounds and Materials Based on Them, A Reference Book [in Russian], Metallurgiya, Chelyabinsk (1989).
ASM Engineered Materials Reference Book, ASM International, Metals Park, Ohio (1989).
A. R. Johnson, “Fracture toughness of AISIM2 and AISIM7 high-speed steels,”Metallurgical Transactions,8A, 891–897 (1977).
Synthetic Superhard Materials [in Russian], Vol. 1, Naukova Dumka, Kiev (1986), p. 137.
V. P. Polyakov, A. V. Nozhkina, and N. V. Chirikov,Diamonds and Superhard Materials [in Russian], Metallurgiya, Moscow (1990).
S. A. Horton and H. C. Child, “Relationship between structure and fracture behavior in 6% W - 5% Mo - 2% V type highspeed steel,”Metals Technology,10, 245–256 (1983).
L. S. Kremnev, “Alloying and heat treatment of tool steels and alloys,” in:Metals Science and Heat Treatment of Steel, A Reference Book [in Russian], Vol. 2, Metallurgiya, Moscow (1983), pp. 298–318.
R. Honeycombe,The Plastic Deformation of Metals, Cambridge University Press, Cambridge (1968).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kremnev, L.S. Critical coefficient of stress intensity and fracture toughness of high-strength tool materials. Met Sci Heat Treat 38, 33–37 (1996). https://doi.org/10.1007/BF01153870
Issue Date:
DOI: https://doi.org/10.1007/BF01153870