Journal of Materials Science

, Volume 30, Issue 18, pp 4659–4668 | Cite as

Interactions under hydrostatic pressure of a mild steel with liquid aluminium alloys

  • Ph. Vaillant
  • J. P. Petitet
Papers

Abstract

Interactions of a mild steel with liquid aluminium alloys have been studied in a pressure range of 0.1 to 350 MPa, and a temperature range from solidus to 750 °C, close to the squeeze casting process conditions. After having carried out the synthesis of previous surveys at atmospheric pressure, the influence of dipping parameters, and especially pressure, along with alloying elements on the intermetallic layer formation and on the mechanical strength of samples have been considered. These results must contribute to the improvement of the processing of steel reinforced aluminium matrix composites by squeeze casting process.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    F. Barbier andM. H. Ambroise, in Proceedings of the Eighth International Conference on Composite Materials, Honolulu, July 15–19, 1991, edited by W. Tsai and G. S. Springer (Society for the Advancement of Material and Process, 1991) 18, p. J1.Google Scholar
  2. 2.
    R. B. Bhagat, in Proceedings of the First European Conference on Composite Materials, Bordeaux, France (September 1985) p. 610.Google Scholar
  3. 3.
    R. B. Bhagat, in Proceedings of the AIME, Interfaces in Metal-Matrix Composites (March 1986) p. 169.Google Scholar
  4. 4.
    R. B. Bhagat,Composites (1986) 393.Google Scholar
  5. 5.
    Idem., Mater. Sci. Eng. 144 (1991) 243.Google Scholar
  6. 6.
    M. A. Dellis, J. P. Keustermann andF. Delannay,ibid. A135 (1991) 253.Google Scholar
  7. 7.
    Ph Vaillant, Thesis, University Paris XIII (1993).Google Scholar
  8. 8.
    S. Dermarkar,Techniques de l'ingénieur, Métallurgie, M 250.Google Scholar
  9. 9.
    S. A. Gedeon andI. Tangerini,Mater. Sci. Eng. A144 (1991) 237.Google Scholar
  10. 10.
    F. A. Girot, Thesis, University of Bordeaux I (1987).Google Scholar
  11. 11.
    F. A. Girot, R. Fedou, J. M. Quenisset andR. Naslain,J. Reinf. Plas. Comp. 9 (1990) 456.Google Scholar
  12. 12.
    Wang Feng-Gang, Zhang-Bin, Xu Shi-Zeng, Liu Shu-Zhen, Zhang Jun-Sheng, Zhang YiGhao andLu Jian-Si, in Proceedings of the Eighth International Conference on Composite Materials, Honolulu, July 15–19, 1991, edited by W. Tsai and G. S. Springer (Society for the Advancement of Material and Process, 1991) 18, p. C1.Google Scholar
  13. 13.
    C. Colin, Y. Marchal, F. Boland andF. Delannay, in Proceedings of EUROMAT 1993, Paris, 8–10 June 1993 (Les éditions de physique) in press.Google Scholar
  14. 14.
    F. Delannay, C. Colin, Y. Marchal, L. Tao, F. Boland, P. Cobzaru, B. Lips andM. A. Dellis, in Proceedings of EUROMAT 1993, Paris, 8–10 June 1993 (Les éditions de physique) in press.Google Scholar
  15. 15.
    T. Shinoda, Hua Liu Y. Mishima andT. Suzuki,Mater. Sci. Eng. A146 (1991) 91.Google Scholar
  16. 16.
    A. G. Metcalfe, in “Interfaces in Metal Matrix Composite”, Composites Materials, Vol 1, edited by A. G. Metcalfe (L. J. Brautman and R. H. Krock Publishers, 1974).Google Scholar
  17. 17.
    A. Kelly andG. J. Davies,Metallurgical Rev. 10, no. 37 (1965) 1.Google Scholar
  18. 18.
    S. G. Denner andR. D. Jones,Met. Technol. 4 (1977) 167.Google Scholar
  19. 19.
    S. G. Denner, R. D. Jones andR. J. Thomas,Iron and Steel Inter. (1975) June, 241–252.Google Scholar
  20. 20.
    V. I. Dybkov,J. Mater. Sci. 25 (1980) 3615.Google Scholar
  21. 21.
    G. Eggeler, Dr. Ing. Thesis, University of Erlangen, (1985).Google Scholar
  22. 22.
    G. Eggeler, W. Auer andH. Kaesche,Z. Metallkd. 77 (1986) 239.Google Scholar
  23. 23.
    Idem., J. Mater. Sci. 21 (1986) 3348.Google Scholar
  24. 24.
    E. Gebhardt andW. Obrowoski,Z. Metallkde. 44 (1953) 154.Google Scholar
  25. 25.
    G. Gürtler andK. Sagel,ibid. 46 (1955) 738.Google Scholar
  26. 26.
    G. Gürtler,Aluminium June (1966).Google Scholar
  27. 27.
    Th. Heumann andS. Dittrich,Z. Metallkde. 50 (1959) 617.Google Scholar
  28. 28.
    N. Komatsu, M. Nakamura andH. Fujita,J. Jpn. Inst. Light. Met. 18 (1968) 474.Google Scholar
  29. 29.
    L. N. Larikov, V. M. Fal'chenko, D. F. Polishchuk, V. R. Ryabov andA. V. Lozovskaya,Prot. Coat. Met. 3 (1971) 66.Google Scholar
  30. 30.
    D. I. Layner andA. K. Kurakin,Fiz. Metal. Metalloved 18 (1964) 148.Google Scholar
  31. 31.
    J. E. Nicholls,Cor. Tech. October (1964) 21.Google Scholar
  32. 32.
    M. Niinomi andY. Ueda,Trans. Jap. Inst. Met. 23 (1982) 709.Google Scholar
  33. 33.
    Y. Uchida, M. Fujita andY. Hirose,Kinzoku Hyomen Gyutsu 33 (1982) 537.Google Scholar
  34. 34.
    V. N. Yeremenko, Ya. V. Matanson andV. I. Dybkov,Avt. Svarka 2 (1974) 5.Google Scholar
  35. 35.
    Idem., J. Mater. Sci. 16 (1981) 1748.Google Scholar
  36. 36.
    R. D. Jones andS. G. Denner, in Proceedings of the Tenth World Congress in Metal Finishing (Metal Finishing of Japan, Kyoto, 1980).Google Scholar
  37. 37.
    S. Rajagopal,J. Appl. Met. Work 1 (1981) 1.Google Scholar
  38. 38.
    A. Mortensen, L. J. Masur, J. A. Cornie andM. C. Flemings,Metall. Trans. A 20A (1989) 2535.Google Scholar
  39. 39.
    L. J. Masur, A. Mortensen, J. A. Cornie andM. C. Flemings,ibid. 20A (1989) 2549.Google Scholar
  40. 40.
    V. V. Brazhkin, S. V. Popova, R. N. Voloshin, L. M. Stanev andI. G. Spirov,High Pressure Research 6 (1992) 333.Google Scholar
  41. 41.
    S. Chatterjee, B. Met andA. A. Das,Brit. Foundryman 66 (1973) 118.Google Scholar
  42. 42.
    J. B. Clark, M. E. Thomas andP. W. Richter,J. Less-Common Met. 132 (1987) 181.Google Scholar
  43. 43.
    A. I. Kingon andJ. B. Clark,High Temp. — High Pres. 16 (1984) 137.Google Scholar
  44. 44.
    Y. Nishida andH. Matsubara,Z. Metallkde. 71 (1980) 189.Google Scholar
  45. 45.
    J. P. Petitet, L. M. Zhu, M. H. Ambroise andT. Verdet, in Proceedings of the XXXVIIIth EHPRG Conference, Bordeaux, July 8–13, 1990, edited by G. Demazeau, C. Cross, S. Matar and A. Rahm (High Pressure Research, 1991) p. 7, 22.Google Scholar
  46. 46.
    W. Hume-Rothery, in “Elements of structural metallurgy” (The Institute of Metals, Monograph and Report series no. 26, London, 1961).Google Scholar
  47. 47.
    T. Soma, Y. Funayama andH. M. Kagaya,J. Mater. Sci. 25 (1990) 3917.Google Scholar
  48. 48.
    M. Hansen andK. Anderko, in “Constitution of binary alloys”, edited by J. Elliot (McGraw-Hill, New York, 1958).Google Scholar
  49. 49.
    A. J. Bradley andA. Taylor,Proc. Royal. Soc. A166 (1938) 353.Google Scholar
  50. 50.
    K. Schubert, “Krystallstrukturen Zweikomponentiger Phasen” (Springer-Verlag, Berlin, 1964).Google Scholar
  51. 51.
    A. Griger, A. Lendvai, V. Stefaniay andT. Turmezey, in “On the phase diagrams of the Al-Fe and Al-Fe-Si systems”, Volume 13/14 (Materials Science Forum, Trans. Tech. Publications Ltd., Switzerland, 1987) p. 331.Google Scholar
  52. 52.
    A. Griger, V. Stefaniay, E. Kovacs-Csetenyi andT. Turmezey, in Proceedings of the International Workshop, Balatonfüred, Hungary, May, Effect of iron and silicon in aluminium and its alloys (Trans Tech Publications, Switzerland, 1989) p. 17.Google Scholar
  53. 53.
    P. Liu, in “Key engineering materials”, edited by I. Kovacs, (1989) pp. 44, 45, 69.Google Scholar
  54. 54.
    Ju. V. Naidich,Prog. Surf. Memb. Sci. 14 (1981) 448.Google Scholar
  55. 55.
    C. Colin, Thesis E.N.S.M.P. Paris (1991).Google Scholar
  56. 56.
    J. Philibert, in “Atom movements, diffusion and mass transport in solids” (Les Éditions de Physique, Paris, 1991).Google Scholar
  57. 57.
    V. I. Dybkov,J. Mater. Sci. 21 (1986) 3078.Google Scholar
  58. 58.
    Idem., ibid. 21 (1986) 3085.Google Scholar
  59. 59.
    J. Sannier, J. Trouve andT. Flament, in “Corrosion des matériaux à haute température” (Les Éditions de Physiques, Paris, 1985).Google Scholar
  60. 60.
    V. G. Rivlin andG. V. Raynor,Int. Met. Rev. 3 (1981) 133.Google Scholar
  61. 61.
    D. M. Karpinos, V. Kh. Kadyrov andV. P. Moroz,Poroshkovaya Metallurgica 5 (1974) 63.Google Scholar
  62. 62.
    S. Ochiai andY. Murakami,J. Mater. Sci. 14 (1979) 831.Google Scholar
  63. 63.
    K. Suganuma,Mater. Lett. 16 (1993) 22.Google Scholar
  64. 64.
    J. H. Westbrook, in “Mechanical properties of intermetallic compounds”, Symposium of the Electrochemical Society, 3–7 May (John Wiley, 1959).Google Scholar
  65. 65.
    D. A. Bennett andD. H. Kirkwood,Met. Sci. 18 (1984) 17.Google Scholar
  66. 66.
    H. W. L. Phillips,J. Inst. Metal. 82 (1953–54) 197.Google Scholar
  67. 67.
    V. Stefaniay, A. Griger andT. Turmezey,J. Mater. Sci. 22 (1987) 539.Google Scholar
  68. 68.
    F. Lihl, E. Nachtigall andA. Schwaiger,Z. Metallkde (1968) 213.Google Scholar
  69. 69.
    P. Rohatgi, R. Asthana,J. O. M.,May (1991) 35.Google Scholar
  70. 70.
    C. N. P. Lupis, in “Chemical thermodynamics of materials” (North Holland, Amsterdam, 1983).Google Scholar
  71. 71.
    Y. Adda andM. Beyleler, in “Physics of solids at high pressure”, edited by C. T. Tomizuka and R. M. Emrick (Academic Press, 1965).Google Scholar
  72. 72.
    R. H. Dickerson, R. F. Bonanno andC. T. Tomizuka, in “Physics of solids at high pressure”, edited by C. T. Tomizuka and R. M. Emrick (Academic Press, 1965).Google Scholar
  73. 73.
    Y. Muramatsu, F. Roux andA. Vignes,Trans. J. I. M. 16 (1975) 61.Google Scholar
  74. 74.
    N. H. Nachtrieb andC. Coston, in “Physics of Solids at high pressure”, edited by C. T. Tomizuka and R. M. Emrick (Academic Press, 1965)Google Scholar

Copyright information

© Chapman & Hall 1995

Authors and Affiliations

  • Ph. Vaillant
    • 1
  • J. P. Petitet
    • 1
  1. 1.Laboratoire d'Ingénierie des Matériaux et des Hautes PressionsCNRS, Institut GaliléeVilletaneuseFrance

Personalised recommendations