Literature cited
V. E. Alekseev, é. D. Glebova, M. I. Kabel'skii, and V. V. Logvinenko, “The precipitation of alpha phase in bellows of 0Kh18N10T steel,” in: Fitting Production [in Russian], No. 5, The Central Design Office of Fittings (1974), pp. 59–65.
é. D. Glebova, G. Ya. Ostrin, A. B. Beloyartsev, et al., “The effect of deformation strengthening and heating on the strength and durability of 0Kh18N10T steel in the manufacture of multilayer bellows,” Khim. Neft. Mashinostr., No. 5, 30–32 (1974).
é. D. Glebova, F. L. Shapiro, E. I. Kireev, et al., “The structure of austenitic steel after deformation and aging,” Metallurg. Koksokhim., No. 44, 73–78 (1975).
K. N. Burtsev, Metal Bellows [in Russian], Mashinostroenie, Moscow-Leningrad (1963).
I. V. Kudryavtsev, “The present status and practical use of surface plastic deformation,” Vest. Mashinostr., No. 1, 35–38 (1972).
Z. G. Fridman and M. G. Veitsman, “The effect of thermomechanical treatment on the cyclic strength of sheets of Kh18N9 steel,” in: The Fatigue of Metal and Alloys [in Russian], Moscow (1971), pp. 97–102.
L. K. Gordienko, Substructure Strengthening of Metals and Alloys [in Russian], Nauka, Moscow (1973).
M. I. Bodyachko, S. A. Astapchik, and G. B. Yaroshevich, “The industrial use of high-frequency currents,” Izv. Akad. Nauk BSSR, Mashinostr., No. 2, 40–42 (1964).
G. K. L'vov, “The effect of alloying on the recrystallization temperature of iron in rapid heating,” Izv. Akad. Nauk SSSR, Metally, No. 2, 100–101 (1966).
Additional information
Translated from Khimicheskoie i Neftyanoe Mashinostroenie, No. 1, pp. 39–41, January, 1977.
Rights and permissions
About this article
Cite this article
Glebova, É.D., Ostrin, G.Y., Chavshino, Y.B. et al. The effect of strengthening treatment on the fatigue durability of stainless-steel bellows. Chem Petrol Eng 13, 77–79 (1977). https://doi.org/10.1007/BF01152924
Issue Date:
DOI: https://doi.org/10.1007/BF01152924