References
L. Shreiner, Hardness of Brittle Solids [in Russian], Izd-vo Akad. Nauk SSSR, Moscow-Leningrad (1949).
V. I. Akunov, “Calculation of specific energy consumptions and the cost of milling on countercurrent jet mills,” in: Physico-Technical Problems in the Processing of Minerals [in Russian], Nauka (Siberian Branch), Novosibirsk (1986), pp. 49–55.
V. I. Akunov, “Rules governing the formation of machine systems,” Vestn. Mashinostr., No. 8, 27–29 (1981).
V. V. Kafarov and M. A. Verdiyan, Processes for the Milling of Solids, Vol. 5 [in Russian], VINITI, Moscow (1977), pp. 5–84.
G. Blasezyk and P. Tiggesbäumler, “Clinker milling in a 150 tons/h compound mill,” Z-K-G, No. 8, 375 (1977).
T. Tanaka, “Scale-up theory of jet mills on the basis of comminute kinetics,” Ind. Eng. Chem. Process Des. Dev.,11, No. 2, 2 (1972).
“Standardizing influence of wear on the self-adjustment of a mill system,” Tr. NIItsementa, No. 70, 49–55 (1982).
W. Duda, Cement Data Book, 2nd Ed., Bauverlag, Wiesbaden-Berlin (1977).
H. Gühne and S. de Silva, “Air-impact mill principle. Applications and costs,” Interceram., No. 2, 107 (1978).
G. Shlaug, “Some problems of the milling by air jets,” Proc. of European Conf. on Milling [in Russian], Stroiizdat, Moscow (1966).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 4, pp. 13–15, April, 1995.
Rights and permissions
About this article
Cite this article
Akunov, F.I. Generalized grinding law. Chem Petrol Eng 31, 208–211 (1995). https://doi.org/10.1007/BF01152299
Issue Date:
DOI: https://doi.org/10.1007/BF01152299