References
GOST 14249-80. Vessels and Apparatus. Standards And Methods of Strength Computation [in Russian].
E. I. Mikhailovskii, Primal, Inverse, And Optimal Problems for Shells with Edge Reinforcement [in Russian], Izd. Leningrad Univ., Leningrad (1986).
E. I. Mikhailovskii and V. L. Nikitenkov, Calculation and rational design of supports for heavily loaded cylindrical shells, Algorithmic Presentation and Automation of Solutions of Elasticity and Plasticity Problems: All-Union Interuniversity Handbook [in Russian], Gor'kovskii Gosudarstvennyi Univ., Gor'kii (1985), pp. 120–125.
E. I. Novakov, Engineering method of calculating maximum temperature stresses in a horizontal autoclave, Proceedings of the All-Union Scientific-Research Institute of Cement machinery: Research And Development of New Equipment for Cement Production [in Russian], No. 28 (1985), pp. 68–76.
Research and Development of New Equipment for the Building-Material Industry, Proceedings of the All-Union Scientific-Research Institute of Construction Machinery [in Russian] (1981).
A. V. Reiman, Determination of temperature stresses in the wall of an autoclave, Theory and Design of Thin-Wall Structures: Proceedings of the Tallinn Polytechnic Institute [in Russian], Tallinn (1987), pp. 62–66.
RD26-01-87-86. Autoclaves. Method for Strength Calculation [in Russian].
I. A. Birger, Circular Plates and Shells of Revolution [in Russian], Oborongiz, Moscow (1961).
V. M. Skopinskii, Effective Finite-Element Models for the Design of Shell Structures [in Russian], Moscow (1985), Deposited in the All-Union Institute of Scientific and Technical Information on April 17, 1985, No. 2417–85.
O. Zeinkeiwicz, Finite-Element Method in Engineering [Russian translation], Mir, Moscow (1975).
O. F. Andrianova, V. É. Berezanskii, V. L. Glezer et al., Automated system for design of structures by finite-element method, Theses of Papers Presented at the All-Union Conference “Automation of Design Work and Building Operations” [in Russian] (1979), p. 116.
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 10, pp. 14–17, October, 1993.
Rights and permissions
About this article
Cite this article
Sudakov, N.S. Design of the housing of a multisupport horizontal autoclave by the finite-element method. Chem Petrol Eng 29, 480–483 (1993). https://doi.org/10.1007/BF01152018
Issue Date:
DOI: https://doi.org/10.1007/BF01152018